Table of Contents
Advertisement
11 Calendar
■
(Alarm conditions)
Select the check boxes for the conditions to use as the alarm time.
The Day of the Week check box can only be configured when the Year check box is cleared.
■
ON Time
Configures the time to write 1 to the Report Device Address according to the type of data.
• After 1 is written to the Report Device Address with ON Time, that value is retained.
Report Device Address
• After a screen configured with the Calendar is displayed, if the time is in between ON Time and OFF
Time, 1 is written to the Report Device Address.
Report Device Address
OFF Time
■
Select this check box to configure the time to write 0 to the Report Device Address.
The time is configured according to the type of data.
• The value of Report Device Address is retained even when the current time exceeds OFF Time.
Report Device Address
• After a screen configured with the Calendar is displayed, if the time exceeds OFF Time, 0 is written to
the Report Device Address.
Report Device Address
■
Report Device Address
Specifies the bit device to write the value to at ON Time and OFF Time.
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device
Address Settings" on page 2-70.
10-210
1
M0 value
0
Time
09:00
1
M0 value
0
Time
09:00
ON Time
1
M0 value
0
Time
10:00
1
M0 value
0
Time
10:00
ON Time
WindO/I-NV4 User's Manual
Value of device address retained after ON Time elapses
09:30
10:00
ON Time
Writes 1 to notify that ON Time has already elapsed
09:30
10:00
Turn on MICRO/I power
Open screen
Value of device address retained after OFF Time elapses
10:30
11:00
OFF Time
Writes 0 to notify that OFF Time has already elapsed
10:30
11:00
OFF Time
Turn on MICRO/I power
Open screen
10:30
11:00
10:30
11:00
OFF Time
11:30
12:00
11:30
12:00
Advertisement
Table of Contents
