Table of Contents
Advertisement
5 User Communication
Configuring registered user communication protocol to another user communication
●
Configure an user communication protocol registered in Protocol Manager to another user communication.
1
On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
2
In the User Communication tab on the Project Settings dialog box, select the user communication to set from the
protocol list, and then click Open Protocol Manager.
Protocol Manager is displayed.
3
Select a user communication protocol in (Protocol List), and click OK.
(Protocol List)
3-28
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
