Table of Contents
Advertisement
7.6 BACnet/IP Settings Procedure
This section describes the procedure for setting BACnet/IP.
1
On the Configuration tab, in the System Setup group, click Project.
The Project Settings dialog box is displayed.
2
Click the BACnet/IP Settings tab, select the Use BACnet/IP check box and click Settings.
The BACnet Settings dialog box is displayed.
3
Configures a basic settings of BACnet/IP.
For details, refer to "BACnet/IP Settings" on page 3-108.
WindO/I-NV4 User's Manual
7 BACnet Communication
3-105
3
Advertisement
Table of Contents
