Table of Contents
Advertisement
Address
Bit
number
Numerical input setting
0
complete
Numerical input setting
1
cancel
2
Backlight auto off running
+3
Sending output to a
3
printer
4
Transferring recipe
Character input setting
5
complete
Character input setting
6
cancel
7 to 15
Reserved
System Area 3
This area is for changing the MICRO/I internal clock data.
Address
Bit
number
0 to 7
Clock data Month
+4
8 to 15
Clock data Year
Clock data Hour
0 to 7
+5
Clock data Day
8 to 15
0 to 7
Clock data Second
+6
8 to 15
Clock data Minute
0 to 14
Reserved
+7
15
Update
When the value of the update bit (address number+7, bit 15) becomes 1, the clock data is updated as a
whole.
Year, month, day, hour, minute, and second cannot be set individually.
Function
This bit changes to 1 when finished entering a numerical value with the
Numerical Input. This bit changes to 0 when entering a numerical value
or when entering a numerical value has been canceled. Write 1 to
numerical input setting clear (address number+1, bit 10) to clear this bit.
This bit changes to 1 when entering a numerical value with the Numerical
Input was canceled. This bit changes to 0 when entering a numerical
value or when entering a numerical value has been completed. Write 1 to
numerical input setting clear (address number+1, bit 10) to clear this bit.
The value of this bit changes to 1 when Auto OFF is configured and the
backlight was turned off by this function. To configure Auto OFF, select
the Auto OFF check box under Backlight in the Project Settings
dialog box. This bit automatically changes to 0 when the backlight turns
on.
This bit changes to 1 when sending output to the printer. This bit
automatically changes to 0 when finished sending output.
This bit changes to 1 when transferring recipe data. This bit automatically
changes to 0 when the transfer is finished.
This bit changes to 1 when finished entering text with the Character
Input. This bit changes to 0 when entering text or when entering text has
been canceled. Write 1 to character input setting clear (address
number+1, bit 11) to clear this bit.
This bit changes to 1 when entering text with the Character Input is
canceled. This bit changes to 0 when entering text or when entering text
has been completed. Write 1 to character input setting clear (address
number+1, bit 11) to clear this bit.
Function
Enter Month (01 to 12) as a 2 digit BCD.
Enter Year (00 to 99) as a 2 digit BCD.
Enter Hour (00 to 23) as a 2 digit BCD.
Enter Day (01 to 31) as a 2 digit BCD.
Enter Second (00 to 59) as a 2 digit BCD.
Enter Minute (00 to 59) as a 2 digit BCD.
Enter 0 in the reserved area.
Write 1 to this bit to write the entered data (address number+4 to
+6, bits 0 to 15) to the MICRO/I internal clock data.
WindO/I-NV4 User's Manual
3 Project Settings Dialog Box
Description
Description
4
4-33
Advertisement
Table of Contents
