Properties Of Alarm Log Display Dialog Box - IDEC WindO/I-NV4 User Manual

8.3 Properties of Alarm Log Display Dialog Box

This section describes items and buttons on the properties dialog box.
General Tab
●
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Alarm Log Settings
Displays the Alarm Log Settings dialog box.
■ Default Settings
These options configure the default settings when the Alarm Log Display is displayed.
Start Line Number: Specifies what number alarm to display when multiple alarms have occurred.
Sort:
Focus:
The range that can be specified varies based on the model type.
HG2J-7U, HG2G-5T, HG1G/1P:
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F:
Selects the display order for alarms that have occurred from the following.
Old, New, New & Level
Selects a style of the focus from the following.
Reverse Performs the negative/positive conversion to the entire row that has the focus.
Occurrence Message
12/01 12 : 00 Current fault
12/01 12 : 00 Current fault
12/01 12 : 00 Current fault
Select Up Down Check
WindO/I-NV4 User's Manual
1 to 5520
1 to 11660
Recovered Confirmed
Occurrence
12/01 12 : 00 Current fault
12 : 50
12/01 12 : 00 Current fault
12 : 54
12/01 12 : 00 Current fault
Delete Select
8 Alarm Log Display
Message Recovered Confirmed
12 : 50
12 : 54
Up Down Check Delete
10-155
10