Table of Contents
Advertisement
3.17 Compatible Tab
The Compatible tab is used to enable the functions in previous versions of WindO/I-NV4 and older MICRO/I series
(HG1B).
This tab is displayed only when the Use Compatible functions for previous version check box or the Use HG1B
Compatible functions check box is selected in the WindO/I-NV4 Options dialog box, on the General tab, under
Compatibility.
■
Compatible with previous version
This option is displayed only when the Use Compatible functions for previous version check box is selected in
the WindO/I-NV4 Options dialog box, on the General tab, under Compatibility.
Script/Trigger Condition:
Calculate 16-bit data with 16-bit:
Select this check box to calculate arithmetic operations (+, -, *, /, modulo) as 16-bit data when
UBIN16(W), BIN16(I), or BCD4(B) is selected for Data Type. Data that exceeds 16 bits is lost.
Clear this check box to calculate as 32 bits. No data will be lost.
Handle Logical operations as Bit operations:
Select this check box to process logical operations (||, &&) by replacing them with bit operations (|,
&). The priority of the replaced bit operators is the same as the corresponding logical operators.
Communication:
Use the same O/I Link Communication as the HG4F/3F/2F/2S/1F:
Select this check box if you will connect the HG5G/4G/3G/2G-V, HG4G/3G or HG2G-5F/-5T, HG1G/1P
to the O/I Link Communication of the HG4F/3F/2F/2S/1F.
HG2J-7U
HG5G-V HG4G-V
HG4G
WindO/I-NV4 User's Manual
3 Project Settings Dialog Box
HG3G-V
HG3G
HG2G-V
HG2G-5F
HG2G-5T
HG1G HG1P
4
4-77
Advertisement
Table of Contents
