Table of Contents
Advertisement
■
Display Method
Specifies the source of the value to display.
Display Device Address:
Use Reference Device Address
*1 Advanced mode only
Specifies the word device that stores the value to display.
Click
to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-70.
*1
: Select this check box and specify a device address to change the source device
address by the value of this device address.
Click
to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-70.
For details on indirect reading, refer to Chapter 2 "Indirect Read and Indirect Write
Settings" on page 2-5.
WindO/I-NV4 User's Manual
10 Numerical Display
10
10-189
Advertisement
Table of Contents
