Table of Contents
Advertisement
8 Alarm Log Display
8.2 Alarm Log Display Configuration Procedure
This section describes the configuration procedure for Alarm Log Displays.
1
On the Home tab, in the Parts group, click Data Displays, and then click Alarm Log Display.
2
Click a point on the edit screen where you wish to place the Alarm Log Display.
3
Double-click the placed Alarm Log Display and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
You can set the default for the Alarm Log Display on the Default Preferences tab of the WindO/I-NV4
Options dialog box. For details, refer to Chapter 2 "Default Preferences Tab" on page 2-63.
10-154
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
