IDEC WindO/I-NV4 User Manual page 231

Allocate device addresses to Present_Value
Configure the parameters in the Present_Value Settings dialog box.
■ Device for Present_Value
Configures the device address for reading Present_Value and the device for writing Present_Value.
The devices for reading Present_Value and writing Present_Value are automatically assigned according to the set
device address. Starting from the specified address number of Device Address, 2 bits of address number are used.
Device for Present_Value
Present_Value for reading
Present_Value for writing
Specify the Top Device Address so that the address number of device address is not exceeded.
■ Top device for priority and trigger
Use this device address when writing the value of the device addresses to Present_Value. For details, refer to
Present_Value in "Binary Value Object" on page 3-143.
Device for priority and Device for write trigger are automatically assigned when the device address is set. Starting
from the specified address number of Device Address, 2 continuous words of address number are used.
MICRO/I Storage Destination
Device for The address number of
priority Top Device Address+0
Device for The address number of
write trigger Top Device Address+1
Specify the Top Device Address so that the address number of device address is not exceeded.
*1 Specify the priority between 1 and 16. If the priority is out of range, If the value of Device for write trigger changes from 0
to 1, then nothing is executed.
The address number of Top Device Address+0
The address number of Top Device Address+1
0: the value of the Present_Value for writing.
Bit 15:
1: NULL(00h).
Bits 14 to 5: Disabled
*1
Bits 4 to 0:
Priority
When the value changes from 0 to 1, writes a value to Priority_Array of index
number indicated by the priority (bit 4 to 0 of Device for priority). The value to
be written varies based on the value of bit 15 of Device for priority.
WindO/I-NV4 User's Manual
7 BACnet Communication
Storage Destination
Description
3
3-123