IDEC WindO/I-NV4 User Manual page 620

2 Multi-State Lamp
Pattern:
Text Color
Flash:
Windows Font:
Line Spacing:
Character Pitch:
Set:
Insert:
Remove:
■ Image
Shows the image for the OFF state or state number selected in the Settings list.
Copy to next State
■
Select this check box to register or change all state settings at once.
This option copies the current settings to all state numbers after the selected state number when the settings are set
or changed. This option can only be set when a state number is selected.
9-26
Shows the pattern or tonal gradation for standard images.
Double clicking the cell opens the Pattern Palette where you can change the pattern or tonal
gradation of the image. This setting can only be changed if Image Type is set to Standard on
the View tab.
Shows the color of the registration text. Double clicking the cell opens the Color Palette where
you can change the color of the text.
Indicates whether to display the drawing object flashing or constantly lit. Double clicking the cell
toggles between Y for yes and N for no. If Y is selected, the picture which corresponds to a bit
state or value of device is alternately shown and hidden at a fixed time interval.
However, if the OFF state is set, the picture that corresponds to a bit state or value of device
and the picture set for the OFF state are alternately displayed at a fixed time interval.
When the OFF state is not set
When ON
Flash
When OFF
Shows the currently set Windows Font. Double clicking the cell displays the Font Settings
dialog box where you can change the Windows Font. This setting can only be changed when
Windows is selected for Font on the Registration Text tab.
Shows the line spacing for Windows Font. Double clicking the cell allows you to change the line
spacing (0 to 100). This setting can only be changed when Windows is selected for Font on
the Registration Text tab.
Shows the character spacing for Windows Font. Double clicking the cell allows you to change
the character spacing (0 to 100). This setting can only be changed when Windows is selected
for Font on the Registration Text tab.
Registers the state settings to the list. If you select the OFF state or state number that is already
registered, that number is overwritten with the new settings.
Click this button to display the State Settings dialog box. For details, refer to "State Settings
Dialog Box" on page 9-27.
Inserts the settings in the position selected on the list.
Select a state number in the list and click this button to display the State Settings dialog box.
The settings at the insertion point shift down one line. Settings cannot be inserted if all state
numbers are configured.
Deletes the registered settings from the list.
Select the OFF state or state number and click this button to delete the selected settings from
the list.
WindO/I-NV4 User's Manual
When the OFF state is set
Shows the picture that
corresponds to the bit
state or device value
Flash
No picture is
shown.
Shows the picture that
corresponds to the bit
state or device value
Shows the picture set
for the OFF state