Table of Contents
Advertisement
■
Range of Value
Configures the range of values to read from the Source Device Address with a fixed value or a value of device
address.
Converts the read value to the specified angle range, and then rotate the picture.
This option can only be configured when the Use Custom Settings check box is selected. When the Use Custom
Settings check box is cleared. only the Maximum can be specified with a fixed value.
Value:
Specifies the range of values to read from the Source Device Address as a constant.
Device Address:
Specifies the range of values to read from the Source Device Address as a value of word device.
Specifies the range of values that corresponds to the range of angle.
Minimum, Maximum: Specifies the minimum and maximum values.
If Value is selected, the minimum and maximum values that can be specified will depend on
the data type selected by Data Type. For details about data types, refer to Chapter 2 "1.1
Available Data" on page 2-1.
If Device Address is selected, specify the word device to be read. Click
Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device Address
Settings" on page 2-70.
When the Minimum is bigger than the Maximum, the picture is not rotated.
■
Range of Angle
Configures the range of the rotation angle with a fixed value or a value of device address. This option can only be
configured when the Use Custom Settings check box is selected.
Value:
Specifies the range of angle for rotation as a constant.
Device Address:
Specifies the range of angle for rotation as a value of word device.
Specifies the range of angle for rotation.
Start, End:
Specifies the start angle of rotation (-360° to 360°) and the end angle of rotation (-360° to
360°).
If Value is selected, the start and end angles that can be specified will depend on the data
type selected by Data Type. For details about data types, refer to Chapter 2 "1.1 Available
Data" on page 2-1.
If Device Address is selected, specify the word device to be read. Click
Editor. For the device address configuration procedure, refer to Chapter 2 "5.1 Device Address
Settings" on page 2-70.
The direction of rotation is as follows.
Start angle < End angle: Clockwise
Start angle > End angle: Counterclockwise
WindO/I-NV4 User's Manual
3 Picture Display
to display the Tag
10
to display the Tag
10-65
Advertisement
Table of Contents
