Table of Contents
Advertisement
Changing Communication Drivers
●
This section describes how to change the communication driver set in the project data being edited.
1
With Communication Driver on the status bar, click one of External Device Communication 1 to External
Device Communication 4.
The Communication Driver tab on the Project Settings dialog box is displayed.
2
Change the settings on each tab as necessary.
3
Click the Communication Driver Network tab, change the settings as necessary and then click OK.
The confirmation message is displayed.
1 Creating and Manipulating WindO/I-NV4 Project Data
WindO/I-NV4 User's Manual
4
4-21
Advertisement
Table of Contents
