Table of Contents
Advertisement
3 Goto Screen Button
Options Tab
●
The Options tab is displayed in Advanced mode.
■
ON delay
Select this check box to use the ON delay function.
Time (x100 msec): Specify the length of time that the button must be held down before activation by selecting a
This feature protects against mistaken operation by ensuring that the button will not be activated if touched
accidentally.
■
No Touch Sound
This function is to disable touch sounds only for specified parts when the MICRO/I makes touch sounds.
Select this check box to display disable touch sounds for this part.
To enable touch sounds on the MICRO/I, select the Enable Touch Sound check box under the System
tab of the Project Settings dialog box.
■
Place on the Top Layer
Select this check box to display the parts on the top layer. The parts will have precedence when other drawings and
parts are overlapping with it. For details, refer to Chapter 6 "4 Drawings and Parts Overlapping" on page 6-5.
8-52
value from 0 to 600 (units of 10 ms).
The button activates after it is held down for a specified period of time.
MICRO/I
WindO/I-NV4 User's Manual
Button
Does not
operate
Hold down for 3 secs.
MICRO/I
Button
Operates
Advertisement
Table of Contents
