Table of Contents
Advertisement
3 Base Screen
■
Display the Order of Overlapping Screens
You can select the display order of the Base Screen and the overlay screens.
Example: To display the Base Screen being edited as the background
Example: To display the Base Screen being edited above overlay screen: 3
■
Flash
Select one of the following items as the setting when the screen is flashing.
None:
Flash (1 sec cycle):
Flash (0.5 sec cycle):
Backlight OFF:
■
Focus Order
Sets the focus order for Numerical Input and Character Input. The focus order is the order the focus moves between
Numerical Input or Character Input when the user presses the ENT key. Text can be input in Numerical Input or
Character Input that has focus. The focus order number starts from 0.
Vertical:
Horizontal:
Custom:
The focus moves in the following order when Numerical Input and Character Input on the screen is not
aligned to the left or top.
Vertical
5-16
Overlay screen
(5 screens max)
Base screen being edited
Base screen being edited
Overlay screen: 3
Displays the screen.
The screen display is flashed in one second intervals.
The screen display is flashed in half second intervals.
Turns off the backlight until the screen is touched or until bit 0 or bit 7 is set to 1 in the
system area 1's address number + 1.
The focus moves vertically from top to bottom.
The focus moves horizontally from left to right.
Sets the desired order for moving the focus.
On the View tab, in the Screens group, click Focus Order, and then click the parts in the
order to move the focus.
1
1234
4
5
2
67
3
890
X-axis left to right
WindO/I-NV4 User's Manual
Horizontal
1
1234
4
2
67
3
890
5
Y-axis up to down
Advertisement
Table of Contents
