Table of Contents
Advertisement
5 Key Button
5
Select Multimedia Function and click Rec.
You are returned to the Properties of Key Button dialog box.
6
Select a recording channel
■
Recording Channel
Selects Channel 1 or Channel 2 to record a video only (no audio) out of the signals input from the device. This
setting is enabled only if Rec. was selected using the Key Browser.
■
Recording Target
In the signals input from the device, select Video and Audio or Video only (No Audio) as the recording target.
7
Click OK.
Close the Properties of Key Button dialog box.
1
8
Repeat steps
through
*2 HG5G/4G/3G-V only
*3 This is applicable for HG4G/3G with a video interface only.
8-104
*2
or a recording target
*2
*3
4
.
WindO/I-NV4 User's Manual
*3
.
Advertisement
Table of Contents
