Table of Contents
Advertisement
9 Data Log Display
9.2 Data Log Display Configuration Procedure
This section describes the configuration procedure for Data Log Displays.
1
On the Home tab, in the Parts group, click Data Displays, and then click Data Log Display.
2
Click a point on the edit screen where you wish to place the Data Log Display.
3
Double-click the placed Data Log Display and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
You can set the default for the Data Log Display on the Default Preferences tab of the WindO/I-NV4
Options dialog box. For details, refer to Chapter 2 "Default Preferences Tab" on page 2-63.
10-172
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
