Table of Contents
Advertisement
1 Creating and Manipulating WindO/I-NV4 Project Data
1.2 Opening Project Data
Opening project data
●
You can open project data that has already been created.
1
Click
, then click Open.
The Open dialog box is displayed.
2
Select the file and click Open.
If a password has been configured for the project data, the Enter Password screen will be displayed. Enter
the password for projects created with WindO/I-NV4 Ver. 1.11.4 or earlier using only 4 to 15 uppercase
letters and numbers.
The password to enter varies based on the check box setting of the Use Password to open a Project
found under the Options tab in the Security dialog box.
When this check box is checked, enter the password for Use Password to open a Project.
When this check box is unchecked, enter the password for the user account assigned to the Administrator
security group.
For details, refer to Chapter 23 "User Accounts and the Security Function" on page 23-1.
Next you will open a screen. For details, refer to Chapter 5 "2.2 Opening Screens" on page 5-3.
Project data can also be opened by the following methods.
Click
4-4
and then click project data on the Recent Projects list
WindO/I-NV4 User's Manual
Advertisement
Table of Contents
