Table of Contents
Advertisement
3 Project Settings Dialog Box
When SERIAL1(RS232C), SERIAL1(RS422/485), COM(RS232C), or COM(RS422/485) is selected under
Interface Configuration
The items displayed in the Interface vary based on the MICRO/I model.
HG2J-7U, HG1G/1P:
HG2G-5T:
Function:
Selects the function used by Serial Interface from the following.
N/A, External Device Communication 1, External Device Communication 2, External
Device Communication 3, External Device Communication 4, O/I Link Master, O/I Link
Slave, User Communication 1, User Communication 2, User Communication 3, Sub Host
Communication
The O/I Link Master and the O/I Link Slave can only be configured when the
SERIAL1(RS422/485) or the COM(RS422/485) is selected for the Interface under the
Interface Configuration.
Baud Rate:
Selects the communication speed with the external device from the following.
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 187500
The baud rate that can be configured varies based on Protocol.
Selects the data length as 7 or 8.
Data Bits:
This option can only be configured when External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device Communication
4, User Communication 1, User Communication 2, User Communication 3, or Sub Host
Communication is selected for Function.
Selects the stop bits as 1 or 2.
Stop Bits:
This option can only be configured when External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device Communication
4, User Communication 1, User Communication 2, User Communication 3, or Sub Host
Communication is selected for Function.
Parity:
Selects the parity from the following.
None, Odd, Even
This option can only be configured when External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device Communication
4, User Communication 1, User Communication 2, User Communication 3, or Sub Host
Communication is selected for Function.
Flow Control:
Selects the flow control method as None or ER according to the external device being used.
This option can only be configured when External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device Communication
4, or Sub Host Communication is selected for Function.
Serial Interface:
Select the interface standard for the serial port. The items that can be displayed vary based on the
Interface under the Interface Configuration.
SERIAL1(RS232C), COM(RS232C)
SERIAL1(RS422/485), COM(RS422/485):
This option can only be configured when External Device Communication 1, External Device
Communication 2, External Device Communication 3, External Device Communication
4, User Communication 1, User Communication 2, User Communication 3, or Sub Host
Communication is selected for Function.
*2 Only special product of HG1P is equipped with a serial interface (RS232C).
4-40
*2
COM(RS232C)
, COM(RS422/485)
SERIAL1(RS232C), SERIAL1(RS422/485)
*2
WindO/I-NV4 User's Manual
RS232C
:
RS422/485 2-wire, RS422/485 4-wire
Advertisement
Table of Contents
