IDEC WindO/I-NV4 User Manual page 8

Abbreviations, Generic Terms, and Terminology Used in this Manual
Item
Project Settings
Alarm Log
Data Log
Script
Text Group
Windows Font
Stroke Font
Maintenance Communication
Device Monitor
Pass-Through
System Screen
External Memory Device
NV Metafile
Window
Internal Device
Keep Device
Drawings
Parts
Object
Touch Switch
Standard Keypad
Movie File List
Preface-7
Basic settings of operation in the Setup settings.
A function where the MICRO/I collects log data of alarms.
A function where the MICRO/I collects value of device addresses.
A script is an executable list of commands created by a simple programming language.
A group of 32 texts maximum that is in order to dynamically switch the character
displayed on the MICRO/I according to the value of the device address.
A character font that can be used on a computer running WindO/I-NV4.
A glyph's outline is defined by the vertices of individual strokes and stroke's profile.
Scalable fonts scale easily without jagged edges.
Under font settings, "Stroke" is a stroke-based font.
Communications between the WindO/I-NV4 and MICRO/I using a dedicated protocol.
A special Popup Screen on the MICRO/I on which value of the device address can be
displayed or changed.
A function that enables maintenance of the external device via the MICRO/I.
Pre-allocated screen dedicated for performing initial setting of the MICRO/I,
self-diagnosis, and clearing the log data etc.
The generic term for an SD memory card and a USB flash drive.
A graphic data file that integrates drawings created on the WindO/I-NV4 edit screen.
Screens that are loaded on to the Base Screen, including Popup Screen and Device
Monitor.
The generic term for internal device addressing on the MICRO/I such as internal relays,
registers, etc.
The generic term for internal device not initialized at the start of operation. Even after
the power is turned off, the values are retained by the battery.
• HMI Keep Registers (LKR)
• HMI Keep Relays (LK)
Define as as non functional content (i.e. shape, picture, text).
Define as functional content (i.e. button, pilot lamp, commands, etc.)
Define as combination of Drawings and Parts placed on WindO/I-NV4 edit screen.
A part that operates a function by pressing parts that have been placed on the screen.
Keypad that is displayed when operating Numerical and Character Input parts when
Standard is selected under Type in the Keypad menu for Numerical and Character
Input parts.
It is a list of movie files that have been registered in the Multimedia Function settings.
You cannot change the order when you play files.
WindO/I-NV4 User's Manual
Description