Closing Project Data - IDEC WindO/I-NV4 User Manual

1.7 Closing Project Data

You can close the project data being edited.
and then click Close.
Click
If the project data being edited has not been saved, a confirmation message for saving the project data is
displayed.
• Click Yes to save the project data and close it.
• Click No to close the project data without saving changes.
• Click Cancel to return to the editing screen without saving the project data.
1 Creating and Manipulating WindO/I-NV4 Project Data
WindO/I-NV4 User's Manual
4
4-23