Table of Contents
Advertisement
1.4 Data Configuration
The sampled data is composed of the channel number, level, message, alarm state, time, and label.
The relationship between the Alarm Log function settings and the sampled data is as follows.
Alarm Log settings
1. Data storage amount
1. Data storage amount: The amount of data that can be saved in the data storage area. For details, refer to "Data
2. Channel No.:
3. Level:
4. Message:
5. Alarm state and time: The alarm state (occurred, recovered, confirmed) and the time the alarm occurred, was
6. Label:
2. Channel No.
3. Level
Sampled data
Ch.No.
Level
1-1
Level 8
1-2
Level 4
1-1
Level 8
1-3
Level 1
1-1
Level 8
Storage Amount" on page 13-8.
Composed of (Block No.)-(Channel No.). The device addresses to monitor and the
conditions for alarm occurrence and recovery are configured in the channels. When the
sampled data is output as a CSV file, the displayed label is "Ch.No.".
It is the level of alarm.
Can only output when the Output Alarm Level check box in the External Memory
Device tab on the Alarm Log Settings dialog box is selected.
The message displayed when an alarm has occurred.
recovered from, and confirmed. When the sampled data is output as a CSV file, the
displayed label varies based on the output method.
When the sampled data is output as a CSV file, this is the text displayed in the label row.
This cannot be changed.
WindO/I-NV4 User's Manual
4. Message
5. Alarm state and time
Message
Occurrence Time
Recovery Time Confirmation Time
Voltage drop
12/01/2011 12:00:05
12/01 12:01:10
Abnormal temperature 12/01/2011 12:01:09
12/01 12:02:21
Voltage drop
12/01/2011 12:02:00
12/01 12:03:11
Overcurrent
12/01/2011 12:30:21
12/01 12:55:15
Voltage drop
12/01/2011 12:45:36
12/01 12:53:12
1 Overview
6. Label
12/01 12:01:30
12/01 12:02:55
12/01 12:05:12
12/01 13:00:00
12/01 12:57:41
13-5
13
Advertisement
Table of Contents
