Table of Contents
Advertisement
5 User Communication
While OFF:
While satisfying the condition:
Data Type:
Select the data type handled by the conditional expression.
Can only be set if While satisfying the condition is selected as Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Device Address: Specifies the bit device or the bit number of the word device to serve as condition. You can only specify
the internal device.
Can only be set if While ON or While OFF is selected as Trigger Type.
Click
2 "5.1 Device Address Settings" on page 2-70.
Condition:
Sets the condition formula.
Can only be set if While satisfying the condition is selected as Trigger Type.
Click
configuration procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-73.
Inching is selected as Type:
Function Key:
Select the function key (F1 to F12) assigned to the command.
Trigger Type:
A condition for data transmission is selected from the following.
Always Enabled: Data is always transmitted at a configured execution interval while a function key is
While satisfying the condition:
Data Type:
Select the data type handled by the conditional expression.
Can only be set if Satisfy the condition is selected as Trigger Type.
For details, refer to Chapter 2 "1.1 Available Data" on page 2-1.
Condition:
Sets the condition formula.
Can only be set if Satisfy the condition is selected as Trigger Type.
Click
configuration procedure, refer to Chapter 2 "5.2 Setting Conditional Expressions" on page 2-73.
3-40
Ready to receive data when the value of device address is 0.
1
Value of Device Address
0
Action
Enabled
Ready to receive data while the condition is satisfied.
Satisfied
Condition
Not satisfied
Action
to display the Tag Editor. For the device address configuration procedure, refer to Chapter
to display the Trigger Condition Settings dialog box. For the conditional expressions
pressed.
Action
Data is transmitted at a configured execution interval while a condition is satisfied.
Satisfied
Condition
Not satisfied
Action
to display the Trigger Condition Settings dialog box. For the conditional expressions
WindO/I-NV4 User's Manual
Enabled
Enabled
Enabled
Always Enabled
Execution Interval
Execution Interval
Execution
Execution
Enabled
Enabled
Execution Interval
Execution
Advertisement
Table of Contents
