Ftp Server Tab - IDEC WindO/I-NV4 User Manual

3 Project Settings Dialog Box

3.13 FTP Server Tab

The FTP Server tab configures the MICRO/I's FTP Server function. For details, refer to Chapter 28 "2 FTP Server
Function" on page 28-16.
(Data Type)
■ Enable FTP Server function
Select this box to enable FTP Server function.
This allows the FTP client to read or write the file contained in the external memory device inserted in the MICRO/I.
■ Port Number
Specifies the TCP port number to use for the FTP server function (0 to 65535).
Regarding TCP port number of MICRO/I, note the following points.
The numbers that cannot be used:
Duplicate numbers cannot be configured in the following functions:
4-68
HG2J-7U HG5G-V HG4G-V HG4G
• 2539: Maintenance communication (Data Transfer)
• 2538: For pass-through
• 2101: For FC4A Series MicroSmart direct connection pass-through
• Maintenance communication
( refer to "Port Number" on page 4-41)
• Web server function ( refer to "Port Number" on page 4-67)
• FTP server function
• TCP Server is selected for the User Communication
( refer to "Port No." on page 4-43)
• Modbus as Manufacture and Modbus TCP Server as
Communication Driver are selected on the Communication
Driver tab
( refer to the WindO/I-NV4 External Device Setup Manual)
• YASKAWA Electric as Manufacture and MP2000(Ethernet) as
Communication Driver are selected on the Communication
Driver tab
( refer to the WindO/I-NV4 External Device Setup Manual)
WindO/I-NV4 User's Manual
HG3G-V HG3G HG2G-V HG2G-5F HG2G-5T HG1G HG1P