IDEC WindO/I-NV4 User Manual page 418

3 Text
■ Vertical Writing
Select this check box to display text vertically.
This option can only be configured when Western, Japanese, Simplified Chinese, Traditional Chinese,
Hangul, Central European, Baltic, Cyrillic, Windows is selected for Font.
When the Vertical Writing check box is selected, take care about the following points. This is applicable
for installations of Windows that support East Asian characters.
• When there is a mixture of double-byte and single-byte characters, the half-width characters are left-
aligned.
Aligned to
le edge
• Dashes are displayed horizontally. Symbols representing voiced and semi-voiced sounds of single-byte
characters are shown as follows.
Horizontal
display
■ Windows Font
Configures the font to use as the Windows Font.
Select Windows for Font to display the current settings. You can specify the character spacing (0 to 100) and the
line spacing (0 to 100). To change the settings other than the character spacing and line spacing, click Change to
display the Font Settings dialog box.
This option can only be configured if the Use Text Manager check box is cleared.
For details, refer to Chapter 2 "Windows Font" on page 2-13.
■ Use Text Manager
Select this check box to use text registered in Text Manager.
■ Text ID
Specifies the Text Manager ID number (1 to 32000) when using text registered in Text Manager.
Click to display Text Manager.
This option can only be configured when the Use Text Manager check box is selected.
■ Text
Enter the text to display. The maximum number is 3750 characters.
The characters that can be entered vary based on the font selected by Font. For details, refer to Chapter 2 "1.2
Available Text" on page 2-6.
This option can only be configured if the Use Text Manager check box is cleared.
A newline is counted as two characters.
■ Text Color
Selects the color for the displayed text (color: 256 colors, monochrome: 16 shades).
Click this button to display the Color Palette. Select a color from the Color Palette.
■ Size
Specifies the text size to be displayed. The fonts and sizes that can be set vary based on the model.
Model
HG2J-7U
HG5G/4G/3G/2G-V, HG4G/3G,
HG2G-5F/-5T, HG1G/1P
7-28
Next
characters
Western, Japanese, Simplified Chinese, Traditional Chinese, Hangul,
Central European, Baltic, Cyrillic
Stroke
WindO/I-NV4 User's Manual
Font Size
8 to 512
8 to 128