Table of Contents
Advertisement
7.2 Alarm List Display Configuration Procedure
This section describes the configuration procedure for Alarm List Displays.
1
On the Home tab, in the Parts group, click Data Displays, and then click Alarm List Display.
2
Click a point on the edit screen where you wish to place the Alarm List Display.
3
Double-click the placed Alarm List Display and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
The Options tab only appears in Advanced mode.
You can set the default for the Alarm List Display on the Default Preferences tab of the WindO/I-NV4
Options dialog box. For details, refer to Chapter 2 "Default Preferences Tab" on page 2-63.
WindO/I-NV4 User's Manual
7 Alarm List Display
10
10-137
Advertisement
Table of Contents
