IDEC WindO/I-NV4 User Manual page 576

8 Selector Switch
Trigger Condition Tab
●
The Trigger Condition tab is displayed in Advanced mode.
■ Input Condition
The Selector Switch is enabled and operational while the condition is satisfied. The Selector Switch is disabled and not
operational while the condition is not satisfied.
Example: When Trigger Type is While ON and Device Address is LM0
While LM0 is 0, the condition is not satisfied and the Selector Switch is not operational.
While LM0 is 1, the condition is satisfied and the Selector Switch is operational.
Trigger Type: Selects the condition to enable the Selector Switch from the following.
Always enable: The Selector Switch is always enabled.
While ON:
8-156
LM0 :
0
Condition
Not
satisfied
LM0 : 1
Condition
Satisfied
Selector Switch
state
Enables the Selector Switch when the value of device address is 1.
1
Value of
device address
0
Selector
Switch state
Disabled
WindO/I-NV4 User's Manual
MICRO/I
Button
Does not
operate
Button
Operates
Enabled
Enabled Disabled Enabled Enabled Disabled