Alarm Log Display; How The Alarm Log Display Is Used - IDEC WindO/I-NV4 User Manual

8

Alarm Log Display

8.1 How the Alarm Log Display is Used

The Alarm Log Display displays Alarm Log data saved in the data storage area.
• List the message, the occurrence time, recovery time, and confirmation time for the alarms that have occurred
0
12 00
:
1
12 53
:
• Display the reference screen for alarms that have occurred
Show focus
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
12/01 13 : 02 Pump1 fault
Select Up Down Delete Reference
Key Button
Only one Alarm List Display or Alarm Log Display can be displayed in a screen.
• For the key buttons used with the Alarm Log Display, refer to Chapter 8 "Alarm Log Display" on page 8-
97.
• When the Operate the Alarm on List directly check box on the General tab in the Properties of
Alarm Log Display dialog box is selected, a displayed alarm can be given focus by pressing it on the list.
• The number of lines from the start line to the selected line of the message displayed on the Alarm Log
Display is stored in HMI Special Data Register LSD56.
HG2J-7U HG5G-V HG4G-V
External device
1
0
Occurrence time
Message
Move focus
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
12/01 13 : 02 Pump1 fault
Select Up Down Delete Reference
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V
MICRO/I
12 : 00
Alarm occurred
Occurrence Message Recovered Confirmed
12/01 12 : 00 Current fault 12 : 53 12 : 54
12 : 53
Select Up Down Check Delete
12 : 54
Occurrence Message Recovered Confirmed
12/01 12 : 00 Current fault 12 : 53 12 : 54
Select Up Down Check
Display reference screen
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
12/01 13 : 02 Pump1 fault
Select Up Down Delete Reference
8 Alarm Log Display
HG2G-5F HG2G-5T HG1G HG1P
Recovered
Confirmed
Confirmation time
Recovery time
Delete
Pump 1 fault
Pump 1 output low
Occurrence Message Recovered Confirmed
12/01 09 : 15 Motor fault
12/01 10 : 02 Press Stop, check the air, Pump1 fault 12 : 50
12/01 10 : 28 High pressure 12 : 54
then press Start.
12/01 13 : 02 Pump1 fault
Air Press.
Select Up Down Delete Reference
0000
Stop Start
kg/m 2
Reference screen
10-153
10