Goto Screen Command Configuration Procedure - IDEC WindO/I-NV4 User Manual

3.2 Goto Screen Command Configuration Procedure

This section describes the configuration procedure for the Goto Screen Command.
1 On the Home tab, in the Parts group, click Commands, and then click Goto Screen Command.
2
Click a point on the edit screen where you wish to place the Goto Screen Command.
3
Double-click the placed Goto Screen Command and a Properties dialog box will be displayed.
4
Change the settings on each tab as necessary.
WindO/I-NV4 User's Manual
3 Goto Screen Command
12-19
12