IDEC WindO/I-NV4 User Manual page 938

2 Word Write Command
Device Address: Use a value of device address.
Specify the device address.
Click
2 "5.1 Device Address Settings" on page 2-70.
Use Reference Device Address
Transfer
■ Destination Device Address
Destination Device Address:
Use Reference Device Address
*1
:
Write
*1 Advanced mode only
12-14
to display the Tag Editor. For the device address configuration procedure, refer to Chapter
*1
: Select this check box and specify a device address to change the
source word device according to the value of the specified device
address.
This setting is enabled only if Action Mode is set to Move.
For details, refer to Chapter 2 "Indirect Read and Indirect Write
Settings" on page 2-5.
*1
:
Specify the number of word devices (1 to 64) to transfer.
This setting is enabled only if Action Mode is set to Move.
Example:
Source Data (Device Address): LDR0
Transfer: 2
Destination Device Address: D100
Write: 3
Specify the destination word device.
Click to display the Tag Editor. For the device address configuration procedure,
refer to Chapter 2 "5.1 Device Address Settings" on page 2-70.
*1
: Select this check box and specify a device address to change the destination word
device according to the value of the specified device address.
This setting is enabled only if Action Mode is set to Move.
For details, refer to Chapter 2 "Indirect Read and Indirect Write Settings" on page
2-5.
Specify the number of word devices (1 to 64) at the destination.
For Move, specify how many times to write.
This setting is enabled only if Action Mode is set to Set, Move, or Momentary.
If Data Type is set to UBIN16(W) and Write is set to 5, the same
Example:
data will be written to 5 continuous word addresses.
Data Type: UBIN16(W)
Source Data (Value): 12345
Destination Device Address: LDR10
Write: 5
If Data Type is set to UBIN32(D) and Write is set to 5, the same
data will be written to a total of 10 word addresses (2 words 5 times).
Data Type: UBIN32(D)
Source Data (Value): 987654
Destination Device Address: LDR10
Write: 5
WindO/I-NV4 User's Manual
If Transfer is set to 2 and Write is set to 3, the
same data in 2 continuous word device addresses will
be written to the destination device address 3 times.
LDR0 999
Satisfied Satisfied Satisfied
LDR1 1000
Condition
LDR10
Satisfied Satisfied Satisfied LDR11
LDR12
Condition
LDR13
LDR14
LDR11
987654
Satisfied Satisfied Satisfied
LDR13
Condition
987654
LDR15
987654
LDR17
987654
LDR19
987654
D100 999
D101 1000
D102 999
D103 1000
D104 999
D105 1000
12345
12345
12345 5 words
12345
12345
LDR10
LDR12
LDR14
2 words x 5
LDR16
LDR18