Communication Interface Tab - IDEC WindO/I-NV4 User Manual

3.2 Communication Interface Tab

The Communication Interface tab is used to configure the functions used by the MICRO/I communication
interfaces.
■ Interface Configuration
Interface Configuration lists the communication interfaces and functions to use. Select the appropriate Interface
(COM1, COM2, etc.) to switch Interface Settings to the items that can be configured for that communication
interface.
The items displayed in Interface vary based on the MICRO/I model. The supported functions for each
communication interface are as follows.
HG2J-7U
Name Interface
COM Serial Interface
(RS232C) (RS232C)
COM Serial Interface
(RS422/485) (RS422/485)
Ethernet Ethernet Interface
USB1 USB Interface
(USB-A) (Type A)
USB2 USB Interface
(USB-B) (Type A)
When External Memory Device is selected as Save To for the sound file in Sound Settings, configures
Speaker to USB2(USB-A).
HG2J-7U HG5G-V HG4G-V
External Device
O/I Link O/I Link
Communication
Master Slave
1 to 4
YES NO NO
YES YES YES
YES NO NO
NO NO NO
NO NO NO
WindO/I-NV4 User's Manual
3 Project Settings Dialog Box
HG4G HG3G-V HG3G HG2G-V HG2G-5F
Function
User
Maintenance
Communication
Communication
1 to 3
YES NO
YES NO
YES YES
YES NO
NO YES
HG2G-5T HG1G HG1P
4
Wireless LAN Speaker
NO NO
NO NO
NO NO
YES YES
YES YES
4-35