3 Base Screen
3
Base Screen
The screen that is displayed when the MICRO/I is in Run Mode. This screen places drawing objects and parts on the
base and creates a screen that is displayed on the MICRO/I.
3.1 Properties of Base Screen Dialog Box
General Tab
●
■
Screen Type
Select Base Screen as the screen type.
You can only select the screen type when creating a new screen.
Number
■
Enter the Base Screen's screen number (1 to 3000).
■
Title
Enter the Base Screen's title. Maximum number is 40 characters.
■
Size
Shows the screen size. You cannot change the size of Base Screens.
■
Screen List
This list shows screens that have already been created. It is only displayed when creating a new screen.
5-14
HG2J-7U
HG5G-V HG4G-V
HG4G
WindO/I-NV4 User's Manual
HG3G-V
HG3G
HG2G-V
HG2G-5F
HG2G-5T
HG1G HG1P