Wire Feeder Consumables - Kemppi Master M 205 Operating Manual

5.3 Wire feeder consumables

This section lists the feed rolls and wire guide tubes available both separately and in consumable kits. The consumable
kits contain recommended feed roll and wire guide tube combinations for selected filler wire materials and diameters.
The wire feeder consumables can be ordered in Configurator.kemppi.com.
In the tables, standard refers to plastic feed rolls and heavy-duty refers to metal feed rolls. The materials mentioned first
refer to primary suitability and the materials mentioned inside brackets refer to secondary suitability.
Wire feeder consumable kits
The table below lists the recommended consumable kits for selected filler wire materials and diameters.
Wire feeder consumable kits
Filler wire material
Fe (MC/FC)
Ss (Fe, Cu)
MC/FC (Master M 323
only)
Al
Wire guide tubes
The table below lists the wire guide tubes available.
Wire guide tubes
Filler wire material
Al, Ss (Fe, MC/FC)
Fe, MC/FC
© Kemppi
Filler wire diameter
Feed roll profile*
(mm)
V-groove 0.8−0.9
1.0
1.2
V-groove 0.8−0.9
1.0
1.2
V-groove, knurled 1.0
1.2
1.4−1.6
U-groove 1.0
1.2
Filler wire diameter (mm)
0.8−0.9
1.0
1.2
0.8−0.9
1.0
1.2
Consumable kit code,
standard
F000527
F000528
F000529
F000533
F000534
F000535
F000536
F000537
F000538
F000542
F000543
Inlet guide tube
W007294
W007295
W007296
W007536
W007537
W007538
69
Master M 205, 323
Operating manual - EN
Consumable kit code,
heavy-duty
F000530
F000531
F000532
-
-
-
F000539
F000540
F000541
-
-
Outlet guide tube
W011440
W011441
W011442
W016614
W016615
W016616
1922130 / 2313