Table of Contents
Advertisement
2.5 Selecting a welding gun
Kemppi mechanization guns offer various benefits
compared with manual welding guns. Carriage control and
powering signals are integrated in the gun cable, so there
is only one cable needed between the wire feeder and
the welding carriage. This also enables the adjustment of
carriage functions and welding parameters at the remote
control device.
Kemppi offers three welding gun models designed
especially for mechanized welding:
PMT MN32C (Multi Neck model)
Multiple neck designs. Slightly bent neck available for
mechanized welding. Extra-long gas nozzle and contact
tip are available, suitable especially for root welding in
narrow grooves.
MMT42C
Gas-cooled straight neck model
MMT42C
Water-cooled straight neck model for heavy applications
Please see the technical details of the welding guns in
their documentation.
2.6 Installing the welding gun
1.
Fasten the gun holder on the weaving unit.
2.
Fasten the gun on the holder.
3.
Connect the control cable.
4.
Ensure that the weaving unit is in center position.
5.
Use adjustment screws and weaving displacement
adjustment to fine-adjust the position of the gun.
© Kemppi Oy 2021
7
A5 MIG Orbital System
R01
Advertisement
Table of Contents
