Overview of Operations
Restoring All Data in the M-5000
The data in the M-5000 is saved as a project file.
You restore data to the M-5000 by loading a project file from a USB
flash drive.
Loading a Project File from a USB Flash Drive
1.
Press the [MENU] button.
2.
At the MENU window, tap <SETUP>, then tap <PROJECT>.
The PROJECT window appears.
ICON
3.
Move to the folder where you want to load the file.
Moves one level below the current folder.
Moves up one level.
4.
Tap <ICON> for the project file you want to load.
5.
Tap <LOAD>.
The LOAD PROJECT window appears.
6.
Select the category you want to load, then tap <LOAD>.
The data in the selected category is loaded.
60
Formatting a USB Flash Drive on the
M-5000
1.
Press the [MENU] button.
2.
At the MENU window, tap <SETUP>, then tap <PROJECT>.
The PROJECT window appears.
3.
Tap <FORMAT>.
A popup prompting you to confirm the operation is displayed.
4.
Tap <FORMAT>.
Formatting of the USB flash drive starts.
Muting All Outputs
This mutes all outputs at times such as when turning the M-5000's
power on or off.
1.
Press the [MENU] button.
2.
AT the MENU window, tap <MUTE GROUP>.
The MUTE GROUP MASTER window appears.
3.
Turn on <MUTE ALL OUTPUTS>.
This mutes all outputs on the M-5000 and input/output units.