Read/Write Plc Axis Data - Mitsubishi Electric M80V Series Manual

M800V/M80V Series PLC Interface Manual
5 Appx.1: PLC window

5.4 Read/Write PLC Axis Data

5.4 Read/Write PLC Axis Data
The section No. to read/write PLC axis data differs from the section No. to read/write NC axis data. The section No. related to
the axis data described in "6 Appx.2: List of PLC Window Data" is for the NC axis. Refer to the following section No. for PLC
axis data.
Sub-section No. is same for both NC axis and PLC axis.
Data section
Axis status
Counter
Servo monitor
Reference position return pa-
rameters
Servo parameters
Absolute position parameters
Base parameters
Axis parameters
(*1) Refer to the PLC axis control device for axis status.
(*2) Refer to the PLC axis control device for the counter (machine position and remaining distance). The information in servo
monitor (Section No. 60) can be also referred there.
IB-1501616-D
NC axis Section No.
36
37
59
95
96
101
126
127
PLC axis Section No.
Not applicable(*1)
Not applicable(*2)
60
131
132
133
Same as the left
130
710