M800V/M80V Series PLC Interface Manual
4 Explanation of Interface Signals
4.4 PLC Output Signals (Data Type: R***)
Cont.
Signal name
G/B spindle synchronization: Position error compensation
A
scale, and the number of times of compensations
[Function]
Set the magnification for the position error compensation amount obtained the first time and the number of times to update
the compensation amount after the "G/B spindle synchronization: Position error compensation" signal (GBCMON) is
turned ON.
[Operation]
F
8 7
(1)
R390
(1) Magnification for the first compensation amount
(2) The number of times of compensations
In "Magnification for the first compensation amount", set the magnification for the position error compensation amount
obtained the first time after the "G/B spindle synchronization: Position error compensation" signal (GBCMON) is turned
ON. (Setting increment: 1/10 times)
When "0" is set, it will be treated as "1".
In "The number of times of compensations", set the number of times to update the compensation amount after the "G/B
spindle synchronization: Position error compensation" signal (GBCMON) is turned ON.
When "0" is set, compensation is repeated by 16 times.
IB-1501616-D
0
(2)
548
Abbrev.
Common ($)
R390