Mitsubishi Electric M80V Series Manual page 734

M800V/M80V Series PLC Interface Manual
6 Appx.2: List of PLC Window Data
6.2 Sub-section No. List
Section No.: 19 Life management information
Significance of data
Sub-ID
No.
Not used.
System No.
Group No.
Section No.: 20 Tool registration
Significance of data
Sub-ID
No.
System No. Not used.
Section No.: 21 Spindle standby
Significance of data
Sub-ID
No.
Magazine
No.
Not used. Not used.
Magazine
No.
Section No.: 22 Tool measurement
Significance of data
Sub-ID
No.
Not used.
Axis No.
System No.
Not used.
Section No.: 25 File information
Significance of data
Sub-ID
No.
Not used. Not used.
Section No.: 33 Speed information
Significance of data
Sub-ID
No.
System No. Not used.
Section No.: 34 Spindle information
Significance of data
Sub-ID
No.
Not used. Axis No.
Sub-section No. Details of Sub-section No.
1 Life management number of registered tool
2 Life management number of registration groups
3 Life management data renewal flag
4 Life management maximum number of registered tools
Life management next tool No. (for L system type II on-
100
ly)
Sub-section No. Details of Sub-section No.
n Tool registration data (pot No.) (n=1 to 360)
1000 + n Tool registration data (tool No.) (n=1 to 360)
2000 + n Tool registration data (miscellaneous: D) (n=1 to 360)
Sub-section No. Details of Sub-section No.
n Spindle standby (tool No.) (n=0 to 4)
10 + n Spindle standby (miscellaneous D) (n=0 to 4)
200 Number of spindle standby displays
1000 Tool life management data for spindle tool
1001 Tool life management data for standby tool
Sub-section No. Details of Sub-section No.
1 TLM switch
2 Final movement direction
3 Final movement axis
4 Second skip contact
Sub-section No. Details of Sub-section No.
1 Machining program number of registrations
2 Machining program number of remains
3 Machining program number of memory characters
4 Machining program number of remaining characters
10 melCopyFile transferred data size
Sub-section No. Details of Sub-section No.
1 FC (resultant speed)
2 FA: F command feedrate
101
Feedrate display FC (resultant speed)
Sub-section No. Details of Sub-section No.
1 Spindle rotation speed (rev/min)
721
Data type R/W
Integer R
Data type R/W
R
Integer
RW
Data type R/W
RW
Integer
R
PLC setting unit
Data type R/W
Integer R
Data type R/W
Integer R
Data type R/W
PLC setting unit/min. R
Data type R/W
Integer R
IB-1501616-D