Mitsubishi Electric M80V Series Manual page 602

M800V/M80V Series PLC Interface Manual
4 Explanation of Interface Signals
4.4 PLC Output Signals (Data Type: R***)
Cont. Signal name
A Ext. machine coordinate system offset data n-th axis
[Function]
This data compensates the basic machine coordinate system. The axis moves the amount equivalent to the set data
(machine error compensation unit). The entire coordinate system value, including the basic machine coordinate system,
will not change.
[Operation]
When the "Ext. machine coordinate system offset data" (R5700 to 15) is set, the axis will move the amount equivalent to
that set value.
The entire coordinate system value, including the basic machine coordinate system, will not change.
If the changed amount of the set value exceeds the rapid traverse feedrate, the set value turns invalid: the compensation
is executed with the set value unchanged.
<Data range>
80000000 (HEX) to 7FFFFFFF (HEX) (Absolute compensation amount -2147483648 to 2147483647)
Unit: Machine error compensation unit
[Related signals]
(1) Ext. machine coordinate system offset data illegal n-th axis (XA40 to XA47)
Cont. Signal name
A Each axis manual feedrate B n-th axis
[Function]
When the "Each axis manual feedrate B valid" signal is valid, designate the manual feedrate for the axis selected with the
"Manual feedrate B valid" signal.
[Operation]
 When the "Each axis manual feedrate B valid" signal is valid, the each axis speed designated with this register is valid
for the manual feedrate of an axis for which the "Manual feedrate B valid" signal is valid.
 Cutting override and manual override are invalid for this register's speed.
 This register is not related to the dry run speed.
 A binary value is directly set for this register. The setting unit is 0.01mm/min (°/min).
 This signal is a register independent for each axis.
[Related signals]
(1) Manual feedrate B valid (FBEn: Y940 to Y947)
(2) Each axis manual feedrate B valid (YC7C)
Abbrev. $1
R5700 to 15 R5716 to 31 R5732 to 47 R5748 to 63
Abbrev. $1
R5764 to R5780 to
5779
589
$2 $3 $4
$2 $3 $4
R5796 to R5812 to
5795 5811 5827
IB-1501616-D