Mitsubishi Electric M80V Series Manual page 547

M800V/M80V Series PLC Interface Manual
4 Explanation of Interface Signals
4.4 PLC Output Signals (Data Type: R***)
Cont. Signal name
A PLC axis OT ignored
[Function]
When the "PLC axis OT ignored" signal is used, a "stroke end error" can be prevented without external wiring of the stroke
end signal (remote I/O connector pin No. fixed signal) provided for each axis. The stroke end signal of the axis for which
the "PLC axis OT ignored" signal is set can be used for other purposes.
[Operation]
When the "PLC axis OT ignored" signal is used at all times or as necessary, the stroke end signal of the corresponding
control axis can be ignored.
The interface for this signal is as follows:
F E D C B A 9
File register
Note
(1) The "PLC axis OT ignored" signal is applicable to "+" and "-" motion at the same time. (Ignored when it turns ON.)
(2) "OT" is abbreviation of "Over Travel".
Cont. Signal name
A Near-point dog ignored
[Function]
When this signal is used, the "Near point detection" signal (remote I/O connector pin No. fixed signal) which is used for
dog type reference position return can be ignored (dog not-passed state).
Furthermore, the "Near point detection" signal for an axis to which the "Near-point ignored" signal is set can be used for
other applications.
[Operation]
When the signal is turned ON, the "Near point detection" signal for the corresponding control axis can be ignored.
The interface for this signal is as follows: Near-point dog is ignored when "Near-point dog ignored" signal is turned ON.
2nd part system
F E D
R272
4th part system
F E D
R273
IB-1501616-D
8 7
1st part system
C B A 9 8 7 6 5
3rd part system
C B A 9 8 7 6 5
Abbrev. Common ($)
R255
6 5 4 3 2 1 0
Abbrev. Common ($)
R272, 3
4 3 2 1 0
1st part system 1st axis
: :
: :
1st part system 8th axis
2nd part system 1st axis
: :
: :
2nd part system 8th axis
4 3 2 1 0
3rd part system 1st axis
: :
: :
3rd part system 8th axis
4th part system 1st axis
: :
: :
4th part system 8th axis
534
1st axis
:
:
8th axis