Mitsubishi Electric M80V Series Manual page 752

M800V/M80V Series PLC Interface Manual
6 Appx.2: List of PLC Window Data
6.2 Sub-section No. List
Significance of data
Sub-ID
No.
Not used.
System No.
Not used.
Not used.
System No.
Not used.
System No. Not used.
Sub-section No. Details of Sub-section No.
100 Tool compensation
101 Tool compensation method
Manual tool length measuring system (for L system
102
only)
103 Validate life management
104 Tool command method 2
105 Tool selection method 2
106 Life management (for L system only)
Split life management display screen (for L system
107
only)
108 Life management re-count M code (for L system only)
109 Validate substitute M code
110 M96 substitute M code
111 M97 substitute M code
112 Validate status trigger method
113 Validate interrupt method type 2
114 Macro argument initialization
115 Waiting for retract
116 Invalidate soft limit (manual operation)
117 H_sens
Select how to set up the length of tools on cutter ta-
118
bles (opposed tables) (for L system only)
Select the mirror image of each facing turret with T
119
command (for L system only)
120 Change macro variable
121 Edit lock C
122 Program display lock C
123 Origin set prohibit
124 Fix tool compensation No.
125 Actual feedrate display
126 Playback G90
127 DPRINT alignment
128 Clear variables by resetting
129 Clear variables by power-ON
130 Display selected tool number
132 brightness
135 Unit name
140 + n M code number (n = 0 to 3)
144 MDI setup lock
145 Manual ABS parameter
146 Spindle rotation speed clamp function
147 Minimum spindle rotation speed clamp type
148 Initial high precision
149 Arc deceleration speed change
151 Reset initial
153 Hole bottom deceleration check
159 Fixed cycle editing
161 Simulation test
162 Part system name
163 Second miscellaneous code
164 Tapping retract override
165 Tap return override
166 G04 skip condition
739
Data type R/W
Integer RW
IB-1501616-D