Date of revision
Manual No.
Mar. 2021
IB(NA)1501616-A
Jul. 2021
IB(NA)1501616-B
Mar. 2022
IB(NA)1501616-C
Mar. 2023
IB(NA)1501616-D
Revision History
The first edition was created.
Contents were revised to correspond to Mitsubishi Electric CNC M800V/M80V Series software ver-
sion A1.
The interface signals in the following chapter were revised or added corresponding to S/W version
A1.
2.1 PLC Input Signals (Bit Type: X***)
2.3 PLC Output Signals (Bit Type: Y***)
2.4 PLC Output Signals (Data Type: R***)
4.1 PLC Input Signals (Bit Type: X***)
4.2 PLC Input Signals (Data Type: R***)
4.3 PLC Output Signals (Bit Type: Y***)
4.4 PLC Output Signals (Data Type: R***)
4.6.1.1 PLC -> CNC
7 Appx.3: List of Option Status Exported to PLC
Other mistakes were corrected.
Contents were revised to correspond to Mitsubishi Electric CNC M800V/M80V Series software ver-
sion A3.
The interface signals in the following chapter were revised or added corresponding to S/W version
A3.
2.1 PLC Input Signals (Bit Type: X***)
2.2 PLC Input Signals (Data Type: R***)
2.3 PLC Output Signals (Bit Type: Y***)
2.4 PLC Output Signals (Data Type: R***)
2.6 ZR Devices
2.7 Classified for Each Application
4.1 PLC Input Signals (Bit Type: X***)
4.2 PLC Input Signals (Data Type: R***)
4.3 PLC Output Signals (Bit Type: Y***)
4.4 PLC Output Signals (Data Type: R***)
4.6 Explanation of ZR Device
5.5 Precautions
Other mistakes were corrected.
Contents were revised to correspond to Mitsubishi Electric CNC M800V/M80V Series software ver-
sion A7.
The interface signals in the following chapter were revised or added corresponding to S/W version
A7.
2.1 PLC Input Signals (Bit Type: X***)
2.2 PLC Input Signals (Data Type: R***)
2.4 PLC Output Signals (Data Type: R***)
2.6 ZR Devices
2.7 Classified for Each Application
4.1 PLC Input Signals (Bit Type: X***)
4.2 PLC Input Signals (Data Type: R***)
4.3 PLC Output Signals (Bit Type: Y***)
4.4 PLC Output Signals (Data Type: R***)
4.6 Explanation of ZR Device
6.1 Section No. List
6.2 Sub-section No. List
Other mistakes were corrected.
Revision details