Table 273: Counter Modules; Table 274: Counter Module, Operating Mode "2 Up Counter/16 Bit / 5 Khz - WAGO -I/O-SYSTEM 750 XTR Manual

234 I/O Modules
and Output Process Image, which has a total of 3 words mapped into each
image. Word alignment is applied.

Table 273: Counter Modules

Input Process Image
Offset
0
1
2
Output Process Image
Offset
0
1
2
Special case: Operating mode "2 Up Counter / 16 Bit / 5 kHz"
The above Counter Modules have a total of 5 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 1 byte of control/ status).
The two counter values are supplied as 32 bits. The following tables illustrate the
Input and Output Process Image, which has a total of 3 words mapped into each
image. Word alignment is applied.

Table 274: Counter Module, Operating mode "2 Up Counter/16 Bit / 5 kHz"

Input Process Image
Offset
0
1
2
Output Process Image
Offset
0
1
2
Manual
Version 1.3.0
Byte Designation
High Byte
-
D1
D3
Byte Designation
High Byte
-
D1
D3
Byte Designation
High Byte
-
D1
D3
Byte Designation
High Byte
-
D1
D3
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Low Byte
S
D0
D2
Low Byte
C
D0
D2
Low Byte
S
D0 Counter Value of Counter 1
D2 Counter Value of Counter 2
Low Byte
C
D0 Counter Setting Value of Counter 1
D2 Counter Setting Value of Counter 2
Description
Status byte
Counter value
Description
Control byte
Counter setting value
Description
Status byte
Description
Control byte