Hex ); Analog Input Point; Table 222: Discrete Output Point Extended; Table 223: Discrete Output Point Extended - WAGO -I/O-SYSTEM 750 XTR Manual

216 Fieldbus Communication
11.3.5.20 Discrete Output Point Extended 3 (72
The extension of the "Discrete Output Point" class enables the exchange of data
from a fieldbus node that contains over 765 digital output points (DOPs). The
instance scope of the "Discrete Output Point Extended 2" class covers DOPs
from 766 to 1020 in the fieldbus node.
Instance 0 (Class Attributes)

Table 222: Discrete Output Point Extended 3 (72

Attribute ID Access
1
2
Instance 766 ... 1020 (Digital Output value 766 up to 1020)

Table 223: Discrete Output Point Extended 3 (72

Attribute ID Access
1
Common Services
Table 224: Discrete Output Point Extended 2 (6E
Service
code
0E
hex
10
hex

11.3.5.21 Analog Input Point (67

This class enables the reading of data of a particular analog input point (AIP). An
analog input point is part of an analog input module.
Instance 0 (Class Attributes)

Table 225: Analog Input Point (67

Attribute ID Access
1
2
Manual
Version 1.3.0
Name
Get Revision
Get Max Instance
Name
Get DopObj_Value
Service available Service name
Class Instance
Yes Yes Get_Attribute_Single Supplies contents of the appropriate
No Yes Set_Attribute_Single
)
hex
) – Class
hex
Name
Get Revision
Get Max Instance
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
)
hex
) – Class
hex
Data type Description
UINT Revision of this object
UINT Max. number of instances
) – Instance 766...1020
hex
Data type Description
BYTE Digital Output
(only Bit 0 valid)
) – Common service
hex
Description
attribute
Modifies an attribute value
Data type Description
UINT Revision of this object
UINT Max. number of instances
Default
value
1 (0x0001)
-
Default
value
-
Default
value
1 (0x0001)
-