Figure 10: Removing The Fuse Carrier; Figure 11: Opening The Fuse Carrier And Changing The Fuse - WAGO -I/O-SYSTEM 750 XTR Manual
Fc ethernet g3 xtr fieldbus coupler ethernet; 3rd generation; extreme
Hide thumbs
Also See for WAGO-I/O-SYSTEM 750 XTR:
- Manual (108 pages) ,
- System manual (72 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
In order to insert or change a fuse, or to switch off the voltage in succeeding I/O
modules, the fuse holder may be pulled out. In order to do this, use a screwdriver
for example, to reach into one of the slits (one on both sides) and pull out the
holder.
Figure 10: Removing the Fuse Carrier
Lifting the cover to the side opens the fuse carrier.
Figure 11: Opening the Fuse Carrier and Changing the Fuse
System Description
Manual
Version 1.3.0
33
Advertisement
Chapters
Table of Contents
