Table of Contents
Advertisement
Quick Links
WAGO-I/O-SYSTEM 750 XTR
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-xxxx/0040-xxxx
Design Notes /XTR
Guidelines and Recommendations
for Increasing Operational Safety
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1
Advertisement
Chapters
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for WAGO 750-626/040-000
Summary of Contents for WAGO 750-626/040-000
- Page 1 WAGO-I/O-SYSTEM 750 XTR Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-xxxx/0040-xxxx Design Notes /XTR Guidelines and Recommendations for Increasing Operational Safety Version 1.2.0...
- Page 2 WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...
-
Page 3: Table Of Contents
2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ................9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 System Description..................13 Manufacturing Number ................ - Page 4 6.7.2 Bus Cables ..................52 6.7.3 Signal Lines ..................53 6.7.4 WAGO Shield Connecting System ............ 53 List of Figures ...................... 54 List of Tables ......................55 === Ende der Liste für T extmar ke Verzeic hnis_vor ne === Manual...
-
Page 5: Notes About This Documentation
Validity of this Documentation Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Gültig keits ber eich Dokumentation Systembesc hrei bung 750- xxxx @ 14\mod_1358944040650_21.doc x @ 109374 @ @ 1 This documentation is only applicable to the WAGO-I/O-SYSTEM 750 XTRseries. -
Page 6: Symbols
Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1... - Page 7 WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 750-xxxx/0040-xxxx Design Notes /XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...
-
Page 8: Number Notation
Pos : 12.10 /Alle Serien (Allgemeine M odul e)/Rechtliches, Allgemeines/Sc hriftkonventi onen @ 3\mod_1221059521437_21.doc x @ 21714 @ @ 1 Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save >... -
Page 9: Important Notes
PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung/Besti mmungsgemäß e Ver wendung 750- xxxx - Übersc hrift 3 und Inhalt @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3... -
Page 10: Technical Condition Of Specified Devices
WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Appropriate housing (per 2014/34/EU) is required when operating the WAGO- I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet. -
Page 11: Safety Advice (Precautions)
Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc... - Page 12 Pos : 15.14 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR - Is olations prüfungen mit DC durchführen! @ 15\mod_1370843209441_21.doc x @ 122210 @ @ 1...
-
Page 13: System Description
IEC 61131-3. Pos : 17.5 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Systembesc hrei bung - Kommuni kati on Kl emmenbus , LEDs , 3-Leitertec hni k @ 3\mod_1231493520906_21.doc x @ 25877 @ @ 1 I/O modules for diverse digital and analog I/O signals as well as special functions can be connected to the fieldbus coupler/controller. - Page 14 750-xxxx/0040-xxxx Design Notes /XTR Pos : 17.6 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Ger ät und Sys tem/Systembesc hrei bung - Ei nführung Serie 750 XTR @ 27\mod_1468507667008_21.doc x @ 216923 @ @ 1 The distinctiveness of the 750 XTR Series lies in its area of application in extreme environmental conditions.
-
Page 15: Manufacturing Number
Pos : 17.9.2 /Serie 750 (WAGO-I/O-SYST EM)/Gerätebesc hrei bung/Bedruc kung/Fertig ungs nummer 750- xxxx - Abbil dung und Erläuterung @ 24\mod_1443678328855_21.doc x @ 192638 @ @ 1 Figure 2: Marking Area for Serial Numbers There are two serial numbers in two rows in the side marking. -
Page 16: Component Update
The original manufacturing data on the housing of the component remain thereby. Pos : 17.12 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Gerät und System/Lagerung, Kommissi onierung und Tr ansport @ 3\mod_1225446600609_21.doc x @ 24897 @ 2 @ 1 Storage, Assembly and Transport Whenever possible, the components are to be stored in their original packaging. -
Page 17: Technical Data
Pos : 20.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Sons tige/M echani k, Ansc hl., Kontakte, Kli ma, Elektr. Sicher heit, IP XTR @ 17\mod_1389346680484_21.doc x @ 141078 @ 3333 @ 1 3.5.1... -
Page 18: Connection Type
System Description WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR 3.5.3 Connection Type Table 5: Technical Data – Field Wiring ® Wire connection CAGE CLAMP ® Push-in CAGE CLAMP Cross section 0.25 mm² … 2.5 mm², AWG 24 … 14 / 0.25 mm²... -
Page 19: Residential Use
WAGO-I/O-SYSTEM 750 XTR System Description 750-xxxx/0040-xxxx Design Notes /XTR Pos : 20.4 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/EMV/Ei ns atz ber eich XTR (Industrie, Wohnber eich) @ 17\mod_1389356140919_21.doc x @ 141147 @ 3 @ 1 3.5.5 Residential Use... -
Page 20: Example Dimensions
System Description WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR 3.5.6 Example Dimensions Figure 3: Dimensions – Nodes with Fieldbus Coupler/Controller (Example) Pos : 21 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual... -
Page 21: Standards And Approvals
I/O module or fieldbus coupler/controller: Pos : 23.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/Nor men und Ric htlini en XTR - Mechani k und Klima Systembes chr eibung @ 18\mod_1394618852600_21.doc x @ 147748 @ @ 1... -
Page 22: Table 10: Emc
Standards and Approvals WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Table 10: EMC Range acc. standard Title EMC immunity to EN 61000-6-1 EMC – Generic Standard – Immunity interference for residential environments EN 61000-6-2 EMC – Generic Standard – Immunity... -
Page 23: Assembly
780 mm. Also note the limitations of individual fieldbus couplers/controllers. Pos : 26.3 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/M ontage auf Tr agschi ene ( XTR) @ 24\mod_1444997402760_21.doc x @ 193805 @ 233 @ 1 Manual Version 1.2.0... -
Page 24: Mounting Onto Carrier Rail
WAGO Kontakttechnik GmbH & Co. KG supplies standardized carrier rails that are optimal for use with the I/O system. If other carrier rails are used, then a technical inspection and approval of the rail by WAGO Kontakttechnik GmbH & Co. KG should take place. -
Page 25: Wago Din Rail
• Use the reinforced end stop 249-197. Pos : 26.5 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Aus wahl der Tragsc hiene für XTR- PFC @ 23\mod_1435150387049_21.doc x @ 184498 @ @ 1 • When using the PFC200 CS 2ETH RS/XTR (750-8202/040-00x), carrier rails without an oblong hole must also be used. -
Page 26: Spacing
Assembly WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Pos : 26.7 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Abstände @ 3\mod_1225448283750_21.doc x @ 24920 @ 2 @ 1 Spacing The spacing between adjacent components, cable conduits, casing and frame sides must be maintained for the complete fieldbus node. -
Page 27: Mounting Sequence
Pos : 26.11 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: Bus kl emmen nur in vorges ehener Rei henfolge stec ken! @ 6\mod_1256194177073_21.doc... - Page 28 Always plug a bus end module 750-600/040-000 onto the end of the fieldbus node! You must always use this bus end module at all fieldbus nodes with the WAGO I/O System 750 XTR fieldbus couplers/controllers to guarantee proper data transfer.
-
Page 29: Inserting And Removing Devices
Assembly 750-xxxx/0040-xxxx Design Notes /XTR Pos : 26.15 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Ger äte ei nfügen und entfernen - Ü bersc hrift 2 @ 3\mod_1231768483250_21.doc x @ 25950 @ 2 @ 1 Inserting and Removing Devices Pos : 26.16 /Alle Serien (Allgemeine M odul e)/Sic herheits- und sonstige Hinweis e/Achtung/Ac htung: Arbeiten an Geräten nur s pannungsfrei durchführen! @ 6\mod_1256193963573_21.doc x @ 43426 @ @ 1 Perform work on devices only if they are de-energized! Working on energized devices can damage them. -
Page 30: Inserting The I/O Module
Assembly WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR 5.6.3 Inserting the I/O Module Position the I/O module so that the tongue and groove joints to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are engaged. Figure 6: Insert I/O Module (Example) Press the I/O module into the assembly until the I/O module snaps into the carrier rail. -
Page 31: Removing The I/O Module
I/O module. Pos : 26.23 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Gefahr/Gefahr: Vorsicht bei der Unter brec hung von F E! - XTR @ 18\mod_1389853538533_21.doc x @ 142058 @ @ 1... -
Page 32: Connect Devices
Pos : 30.4 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: ESD - Auf g ute Erdung der U mgebung ac hten! @ 7\mod_1266318538667_21.doc x @ 50708 @ @ 1 Ensure that the environment is well grounded! The devices are equipped with electronic components that may be destroyed by electrostatic discharge. -
Page 33: Power Contacts/Field Supply
Power Contacts/Field Supply Pos : 30.7 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. -
Page 34: Connecting A Conductor To The Cage Clamp
WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Pos : 30.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ansc hließ en/Leiter an CAGE CLAMP ansc hließ en (allgemein) - Ü berschrift 2 und T ext @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®... -
Page 35: Connecting A Conductor To The Push-In Cage Clamp
750-xxxx/0040-xxxx Design Notes /XTR Pos : 32 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an Pus h-in CAGE CLAMP® ansc hließ en - Ü bersc hrift 2 und T ext @ 6\mod_1258964749000_21.doc x @ 44640 @ 2 @ 1 Connecting a Conductor to the Push-in CAGE ®... -
Page 36: Power Supply
Pos : 34.3 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Potentialtr ennung - Bild (Standard + er weiter ter ECO) @ 3\mod_1232950095187_21.doc x @ 26740 @ @ 1 Figure 13: Isolation for Fieldbus Couplers/Controllers (Example) Pos : 34.4 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1... -
Page 37: System Supply
Pos : 34.7 /Serie 750 (WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Sys temvers orgung XTR - Ansc hluss - Systemvers orgung (Standard + er weiterter ECO) mi t LWL-Anz eige @ 16\mod_1373884059484_21.doc x @ 126140 @ @ 1 Figure 14: System Voltage for Fieldbus Couplers/Controllers (Example) Table 13: Legend for Figure “System Voltage for Fieldbus Couplers/Controllers”... -
Page 38: Dimensioning
Figure 15: System Supply for Fieldbus Coupler/Controller Pos : 34.10 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Systemversorgung - Ans chl uss - Hi nweis: Gleic hz. Rüc ksetz en all er Versorgungs module @ 3\mod_1232950097906_21.doc x @ 26760 @ @ 1... - Page 39 Example: Pos : 34.17 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Systemversorgung XTR - Ausl egung - Beis piel 2 ( er weiterter EC O) @ 16\mod_1373894651926_21.doc x @ 126155 @ @ 1 Calculating the total current on the Example Coupler described above: A node with the example coupler, which is described above, consists of: •...
- Page 40 (87 % Efficiency of the power supply at nominal load 24 V) Pos : 34.20 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Systemversorgung - Ausl egung - Hinweis: Bei T est der Stromaufnahme Ausgänge akti vieren @ 3\mod_1232950110750_21.doc x @ 26812 @ @ 1...
-
Page 41: Field Supply
Pos : 34.24 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/F eldvers orgung - Ansc hluss - Ei ns peis ung felds eitig (Standard + erweiterter EC O) @ 3\mod_1232950087703_21.doc x @ 26712 @ @ 1 The fieldbus coupler/controller provides field side power (DC 24 V). -
Page 42: Fusing
Pos : 34.28 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/F eldvers orgung - Ansc hluss - 2 Hinweis e: Potenti al neu einspeisen + Distanz kl emme @ 3\mod_1232950091343_21.doc x @ 26724 @ @ 1... -
Page 43: Figure 19: Fuse Modules With Pivotable Fuse Carrier, Series 281
WAGO-I/O-SYSTEM 750 XTR Connect Devices 750-xxxx/0040-xxxx Design Notes /XTR Figure 19: Fuse Modules with Pivotable Fuse Carrier, Series 281 Figure 20: Fuse Modules with Pivotable Fuse Carrier, Series 2002 Pos : 34.30 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0... -
Page 44: Power Supply For Mixed Operation
Pos : 34.32 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR- Abschnitte aussc hließlic h mit XTR-Ei ns peis ekl emmen begi nnen @ 27\mod_1468396316258_21.doc... -
Page 45: Supplementary Power Supply Regulations
WAGO-I/O-SYSTEM 750 XTR Connect Devices 750-xxxx/0040-xxxx Design Notes /XTR Pos : 34.34 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Ergänzende Ei nspeis evors chriften XTR (Standar d) @ 16\mod_1373896786700_21.doc x @ 126194 @ 3 @ 1 6.5.5 Supplementary Power Supply Regulations The WAGO-I/O-SYSTEM 750 XTR can also be used in shipbuilding applications and onshore/offshore installations (e.g., platforms, loading facilities), as well as in... - Page 46 Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR The 24 V field power supply systems must be protected against overvoltage. Therefore, the power must be supplied via field-side power supply filter 750-624/040-001 or power supply filter 750-626/ 040-000. For this potential group, only the supply module 750-612/040-000 is required for a 230 V field power supply.
-
Page 47: Supply Example
Pos : 34.37 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Vers orgungsbeispi el - Bild XTR @ 18\mod_1393260466178_21.doc x @ 146269 @ @ 1 Figure 22: Power Supply Example Pos : 34.38 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Vers orgungsbeispi el - Leg ende z u Abbildung " Versorgungsbeis piel XTR" @ 18\mod_1393260531676_21.doc x @ 146272 @ @ 1 Manual... -
Page 48: Table 18: Legend For Figure "Power Supply Example
Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Table 18: Legend for Figure “Power Supply Example” Item Description Power supply on the fieldbus coupler/controller via external system supply module Supply module 24 V Supply module with bus power supply 24 V... -
Page 49: Power Supply Units
WAGO-I/O-SYSTEM 750 XTR Connect Devices 750-xxxx/0040-xxxx Design Notes /XTR Pos : 34.40 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/N etzg eräte XTR @ 16\mod_1373963895846_21.doc x @ 126216 @ 3 @ 1 6.5.7 Power Supply Units The WAGO-I/O-SYSTEM 750 XTR requires 24 VDC voltage (system supply) for operation. -
Page 50: Grounding
Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Pos : 34.42 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Erdung @ 3\mod_1231246555687_21.doc x @ 25802 @ 23443 @ 1 Grounding 6.6.1 Grounding the DIN Rail 6.6.1.1 Framework Assembly When setting up the framework, the carrier rail must be screwed together with the electrically conducting cabinet or housing frame. -
Page 51: Grounding Function
WAGO-I/O-SYSTEM 750 XTR Connect Devices 750-xxxx/0040-xxxx Design Notes /XTR 6.6.2 Grounding Function The grounding function increases the resistance against electro-magnetic interferences. Some components in the I/O system have a carrier rail contact that dissipates electro-magnetic interferences to the carrier rail. -
Page 52: Shielding
Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-xxxx/0040-xxxx Design Notes /XTR Pos : 34.44 /Serie 750 ( WAGO-I/O-SYST EM)/Systembesc hrei bung/Vers orgung/Sc hirmung @ 3\mod_1231251994828_21.doc x @ 25813 @ 23333 @ 1 Shielding 6.7.1 General Use of shielded cables reduces electromagnetic interference and thus increases signal quality. -
Page 53: Signal Lines
6.7.4 WAGO Shield Connecting System The WAGO shield connecting system consists of shield clamping saddles, busbars and various mounting carriers. These components can be used to achieve many different configurations. -
Page 54: List Of Figures
Figure 23: Carrier Rail Contact (Example) ............51 Figure 24: Cable Shield at Ground Potential ............52 Figure 25: Examples of the WAGO Shield Connecting System ......53 Figure 26: Application of the WAGO Shield Connecting System ....... 53 Pos : 37 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0... -
Page 55: List Of Tables
Table 9: Climatic and Mechanical Environmental Conditions ......21 Table 10: EMC ...................... 22 Table 11: WAGO DIN Rail ................... 25 Table 12: Permissible WAGO Carrier Rails When Using XTR PFC200 ..... 25 Table 13: Legend for Figure “System Voltage for Fieldbus Couplers/ Controllers” ....................37 Table 14: Alignment .................... - Page 56 Pos : 40 /D okumentation allgemei n/Einband/Einband H andbuc h - Leers eite für durc h 2 teilbar e Seitenzahl (Standar ddr uc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1 Pos : 41 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •...
Need help?
Do you have a question about the 750-626/040-000 and is the answer not in the manual?
Questions and answers