Table 198: Coupler/Controller Configuration; Table 199: Coupler/Controller Configuration - WAGO -I/O-SYSTEM 750 XTR Manual

210 Fieldbus Communication
Instance 0 (Class Attributes)

Table 198: Coupler/Controller configuration (64

Attribute ID
1
2
Instance 1

Table 199: Coupler/Controller configuration (64

Attribute ID
5
6
7
8
9
10
11
12..26
40..43
45
46
Pos : 96.11 /Serie 750 ( WAGO-I/O-SYST EM)/Funkti onsbesc hrei bung/F eldbus kommuni kation/EtherN etIP/C oupl erControll er C onfig urati on - AttributID 120, 121, C ommon s er vice @ 3\mod_1233831576390_21.doc x @ 27222 @ @ 1
Manual
Version 1.3.0
Acces Name Data type Description
s
Get Revision UINT
Get Max Instance UINT
Acces NV Name
s
Get V ProcessStat
e
Get V DNS_i_
Trmnldia
Get V CnfLen.
AnalogOut
Get V CnfLen.
AnalogInp
Get V CnfLen.
DigitalOut
Get V CnfLen.
DigitalInp
Set NV Bk_Fault_
Reaction
Reserved for compatibility to DeviceNet
Reserved for compatibility to DeviceNet
Get V Bk_Led_Err
_Code
Get V Bk_Led_Err
_Arg
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
) – Class
hex
Revision of this object
Maximum number of
instances
) – Instance 1
hex
Data type Description
USINT State of coupler/controller, error
mask:
Bit 0: Local bus error
Bit 3: Module diagnostics (0x08)
Bit 7: Fieldbus error (0x80)
UINT Module diagnostics:
Bit 0..7: Module number
Bit 8..14: Module channel
Bit 15: 0/1 Error, repair/arisen
UINT Number of I/O bits for the analog
output
UINT Number of I/O bits for the analog
input
UINT Number of I/O bits for the digital
output
UINT Number of I/O bits for the digital
input
USINT Fieldbus error reaction
0: stop local I/O cycles
1: set all output to 0
2: no error reaction
3: no error reaction
4: PFC task takes over control of
the outputs (apply to controllers)
UINT I/O LED error code
UINT I/O LED error argument
Default value
1 (0x0001)
1 (0x0001)
Default
value
0
0
-
-
-
-
1
0
0