Special Use Conditions For Ethernet Devices - WAGO -I/O-SYSTEM 750 XTR Manual

WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Pos : 17 /All e Seri en (Allgemei ne Module)/R ec htlic hes , Allgemei nes /Spezielle Ei ns atz besti mmungen für ETHERN ET-Geräte - Übersc hrift 2 und Inhalt @ 12\mod_1336642945500_21.doc x @ 94792 @ 2 @ 1
2.3

Special Use Conditions for ETHERNET Devices

If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
• Do not connect control components and control networks directly to an
open network such as the Internet or an office network. WAGO
recommends putting control components and control networks behind a
firewall.
• Limit physical and electronic access to all automation components to
authorized personnel only.
• Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
• Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
• If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
• Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
• Use "defense-in-depth" mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Pos : 18 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Important Notes 19
Manual
Version 1.3.0