Table 144: Register Address 0X2041; Table 145: Register Address 0X2042; Table 146: Register Address 0X2043 - WAGO -I/O-SYSTEM 750 XTR Manual

182 Fieldbus Communication

Table 144: Register Address 0x2041

Register address 0x2041 (8257
Value
Access
Description

Table 145: Register Address 0x2042

Register address 0x2042 (8258
Value
Access
Description

Table 146: Register Address 0x2043

Register address 0x2043 (8259
Value
Access
Description
Pos : 94.51 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.3.0
)
dez
Flash format
Write (Write sequence 0xAA55 or 0x55AA)
The file system Flash is again formatted.
)
dez
Extract data files
Write (Write sequence 0xAA55 or 0x55AA)
The standard files (HTML pages) of the Coupler/Controller are extracted and
written into the Flash.
)
dez
0x55AA
Write
Factory settings
The default settings are applied after the next reset, e.g., software reset via
MODBUS register address 0x2040.
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR