Table 137: Register Address 0X1037; Table 138: Register Address 0X1050; Table 139: Register Address 0X2030 - WAGO -I/O-SYSTEM 750 XTR Manual

180 Fieldbus Communication

Table 137: Register Address 0x1037

Register address 0x1037 (4151
Value
Access
Default
Description
Pos : 94.46 /Serie 750 ( WAGO-I/O-SYST EM)/Funkti onsbesc hrei bung/F eldbus kommuni kation/M ODBU S/Z ugriff auf R egister werte - Konfigurationsregister 0x1050 @ 4\mod_1235634956296_21.doc x @ 27802 @ @ 1

Table 138: Register Address 0x1050

Register address 0x1050 (4176
Value
Access
Description
Pos : 94.47 /Serie 750 ( WAGO-I/O-SYST EM)/Funkti onsbesc hrei bung/F eldbus kommuni kation/M ODBU S/Z ugriff auf R egister werte - Konfigurationsregister 0x2030 @ 3\mod_1235461168031_21.doc x @ 27622 @ @ 1

Table 139: Register Address 0x2030

Register address 0x2030 (8240
Value
Access
Description
Pos : 94.48 /Serie 750 ( WAGO-I/O-SYST EM)/Funkti onsbesc hrei bung/F eldbus kommuni kation/M ODBU S/Z ugriff auf R egister werte - Konfigurationsregister 0x2031, 0x2032, 0x2033 @ 4\mod_1235636342812_21.doc x @ 27818 @ @ 1
Manual
Version 1.3.0
) with a word count of 3
dez
Configuration of Modbus Response Delay Time
Read/write
0x0000
This register saves the value for the Modbus Response Delay Time for a Modbus
connection. The time base is 1 ms. On the Modbus TCP connection, the
response will be delayed by the inscribed time.
) with a word count of 3
dec
Diagnosis of the connected I/O modules
Read
Diagnosis of the connected I/O modules, length 3 words
Word 1: Number of the module
Word 2: Number of the channel
Word 3: Diagnosis
) with a word count of up to 65
dec
Description of the connected I/O modules
Read module 0...64
Length 1...65 words
The node configuration can be specified in the 0x2030 register. The item number
of the I/O modules or fieldbus coupler/controller (without leading 750) is listed in
order. Each module is represented in a word. Because order numbers cannot be
read out of digital modules, a code is displayed for them, as defined below:
Bit position 0
Bit position 1
Bit position 2...7
Bit position 8...14 
Bit position 15
Examples:
4 Channel Digital Input Module = 0x8401
Bit 15 14 13 12 11 10
Code 1 0 0 0
Hex 8
2 Channel Digital Output Module = 0x8202
Bit 15 14 13 12 11 10
Code 1 0 0 0
Hex 8
WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Input module

Output module

Not used

Module size in bits
Designation digital module

9 8 7 6
0 1 0 0 0 0
4
9 8 7 6
0 0 1 0 0 0
2
5 4 3 2 1
0 0 0 0 0
0 1
5 4 3 2 1
0 0 0 0 1
0 2
0
1
0
0