WAGO I/O-SYSTEM 750 XTR Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. I/O Systems
  5. WAGO-I/O-SYSTEM 750 XTR Series
  6. Manual

WAGO I/O-SYSTEM 750 XTR Manual

2di 220v dc 3.0ms/xtr 2-channel digital input module 220 vdc, 2- to 4-wire connection, high-side switching/xtr
Hide thumbs Also See for I/O-SYSTEM 750 XTR:
Table of Contents

  • Deutsch
    • Table of Contents
    • Notes about this Documentation
    • Validity of this Documentation
    • Copyright
    • Symbols
    • Number Notation
    • Font Conventions
    • Table 1: Number Notation
    • Table 2: Font Conventions
    • Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions
    • Personnel Qualifications
    • Subject to Changes
    • Legal Bases
    • Important Notes
    • Technical Condition of Specified Devices
    • Safety Advice (Precautions)
    • Device Description
    • View
    • Figure 1: View
    • Table 3: Legend for Figure "View
    • Connectors
    • Data Contacts/Internal Bus
    • Figure 2: Data Contacts
    • Power Jumper Contacts/Field Supply
    • Figure 3: Power Jumper Contacts
    • Table 4: Legend for Figure "Power Jumper Contacts
    • CAGE CLAMP ® Connectors
    • Figure 4: CAGE CLAMP ® Connectors
    • Table 5: Legend for Figure "CAGE CLAMP ® Connectors
    • Display Elements
    • Operating Elements
    • Schematic Diagram
    • Figure 5: Display Elements
    • Figure 6: Schematic Diagram
    • Table 6: Legend for Figure "Display Elements
    • Table 7: Technical Data - Device
    • Table 10: Technical Data - Communication
    • Table 9: Technical Data - Inputs
    • Table 8: Technical Data - Supply
    • Technical Data
    • Communication
    • Inputs
    • Supply
    • Device
    • Table 15: Technical Data - Climatic Environmental Conditions
    • Table 14: Technical Data - Mechanical Conditions
    • Table 13: Technical Data - Data Contacts
    • Table 12: Technical Data - Power Jumper Contacts
    • Table 11: Technical Data - Field Wiring
    • Climatic Environmental Conditions
    • Mechanical Conditions
    • Connection Type
    • Approvals
    • Standards and Guidelines
    • Table 16: Climatic and Mechanical Environmental Conditions
    • Table 17: EMC - Immunity to Interference
    • Table 18: EMC - Emission of Interference
    • Process Image
    • Table 19: Input Bits
    • Mounting
    • Mounting Sequence
    • Inserting and Removing Devices
    • Inserting the I/O Module
    • Figure 7: Insert I/O Module (Example)
    • Removing the I/O Module
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Connect Devices
    • Connecting a Conductor to the CAGE CLAMP
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Figure 12: Connecting Diagram, 3-Conductor Connection
    • Figure 11: Connecting Diagram, 2-Conductor Connection
    • 2-Conductor Connection
    • Connection Examples
    • 4-Conductor Connection
    • Figure 13: Connecting Diagram, 4-Conductor Connection
    • Use in Hazardous Environments
    • Marking Configuration Examples
    • Marking for Europe According to ATEX and IEC-Ex
    • Figure 14: Side Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 15: Text Detail - Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Table 20: Description of Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 16: Side Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 17: Text Detail - Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Table 21: Description of Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Marking for America According to NEC 500
    • Figure 18: Side Marking Example for I/O Modules According to NEC 500
    • Figure 19: Text Detail - Marking Example for Approved I/O Modules
    • Table 22: Description of Marking Example for Approved I/O Modules
    • Installation Regulations
    • Special Conditions for Safe Use (TÜV 14 ATEX 148929 X)
    • Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X)
    • Special Conditions for Safe Use (IEC-Ex Certificate TUN 14.0035X)
    • Special Conditions for Safe Use (IEC-Ex Certificate Iecex TUN 12.0039 X)
    • Special Conditions for Safe Use According to ANSI/ISA 12.12.01

  • English

Advertisement

Quick Links

Download this manual
WAGO-I/O-SYSTEM 750 XTR
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-407/040-000
2DI 220V DC 3.0ms /XTR
2-Channel Digital Input Module 220 VDC,
2- to 4-Wire Connection, High-side Switching /XTR
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I/O-SYSTEM 750 XTR and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO I/O-SYSTEM 750 XTR

Summary of Contents for WAGO I/O-SYSTEM 750 XTR

  • Page 1 WAGO-I/O-SYSTEM 750 XTR Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-407/040-000 2DI 220V DC 3.0ms /XTR...
  • Page 2 WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...

  • Page 3: Table Of Contents

    2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ................9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ......................
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR 6.2.3 4-Conductor Connection ..............35 Use in Hazardous Environments .............. 36 Marking Configuration Examples ............37 7.1.1 Marking for Europe According to ATEX and IEC-Ex ...... 37 7.1.2 Marking for America According to NEC 500 ........

  • Page 5: Notes About This Documentation

    Validity of this Documentation Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Gültig keits ber eich Dokumentation Bus kl emme 750- xxxx, ohne Variantenangabe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1 This documentation is only applicable to the I/O module 750-407/040-000 (2DI 220V DC 3.0ms /XTR).

  • Page 6: Symbols

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 750-407/040-000 2DI 220V DC 3.0ms /XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...

  • Page 8: Number Notation

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 12.7 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/D arstellung der Z ahlens ys teme - Ü bers chrift 2 @ 23\mod_1435647128078_21.doc x @ 184811 @ 2 @ 1 Number Notation Pos : 12.8 /All e Seri en ( Allgemei ne Module)/R ec htliches , Allgemei nes /Zahlens ysteme @ 3\mod_1221059454015_21.doc x @ 21711 @ @ 1...

  • Page 9: Important Notes

    PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung/Besti mmungsgemäß e Ver wendung 750- xxxx - Übersc hrift 3 und Inhalt @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3...

  • Page 10: Technical Condition Of Specified Devices

    WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Appropriate housing (per 2014/34/EU) is required when operating the WAGO- I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet.

  • Page 11: Safety Advice (Precautions)

    Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
  • Page 12 Pos : 15.14 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR - Is olations prüfungen mit DC durchführen! @ 15\mod_1370843209441_21.doc x @ 122210 @ @ 1...

  • Page 13: Device Description

    Pos : 18.10 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: Maxi maler Str om Eins peisung 750-0407/040- 000 @ 17\mod_1382014146271_21.doc x @ 134451 @ @ 1 Manual Version 1.2.0...
  • Page 14 Pos : 18.11 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Hinweis/Hi nweis : XTR - M ax. Bus klemmenanz ahl beac hten! @ 16\mod_1372412268785_21.doc x @ 125110 @ @ 1...

  • Page 15: View

    Figure 1: View Pos : 22 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht C ageCl amp® _Leg ende mit LED s, mit 1 Entrieg elungslasc he @ 15\mod_1370867188922_21.doc x @ 122225 @ @ 1 Table 3: Legend for Figure “View”...

  • Page 16: Connectors

    Pos : 26.3 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: ESD - Auf g ute Erdung der U mgebung ac hten! @ 7\mod_1266318538667_21.doc x @ 50708 @ @ 1 Ensure that the environment is well grounded! The devices are equipped with electronic components that may be destroyed by electrostatic discharge.

  • Page 17: Power Jumper Contacts/Field Supply

    Figure 3: Power Jumper Contacts Pos : 29.5 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üsse/Leistungs kontakte 3 LK (Mess er/Leis tungs kontakte 3 LK (Messer /Feder) - Legende ( 220 V) @ 16\mod_1371744255053_21.doc x @ 123919 @ @ 1 Manual Version 1.2.0...

  • Page 18: Table 4: Legend For Figure "Power Jumper Contacts

    Pos : 29.6 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Achtung/Achtung: M axi mal er Strom Einspeis ung 750-0407/040-000 @ 17\mod_1382014146271_21.doc x @ 134451 @ @ 1 Do not exceed maximum current via power contacts!

  • Page 19: Cage Clamp ® Connectors

    Device Description 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 31 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/CAGE CLAMP- Anschl üss e - Ü berschrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 1 ®...

  • Page 20: Display Elements

    Display Elements Pos : 35 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Anz eigeelemente/Digitalei ngangs klemmen/Anz eigeel emente 750- 04xx/0040- xxxx 2 D I (Ag n, Egn) neutr al @ 16\mod_1372344724973_21.doc x @ 125066 @ @ 1 Figure 5: Display Elements Table 6: Legend for Figure “Display Elements”...

  • Page 21: Technical Data

    48 g Degree of protection IP20 Pos : 42.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/Digitalei ngangskl emmen/Tec hnische D aten 750-0407/Tec hnische D aten 750-0407/0040- xxxx @ 16\mod_1372345019348_21.doc x @ 125070 @ 33 @ 1 3.6.2 Supply Table 8: Technical Data –...

  • Page 22: Connection Type

    Pos : 42.5 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/T echnisc he Daten/VS (Variablensteuer ung)/T echnisc he D aten M ec hanisc he Bedingungen ( VS) - XTR @ 15\mod_1369387569701_21.doc x @ 120364 @ 3 @ 1 3.6.6 Mechanical Conditions Table 14: Technical Data –...

  • Page 23: Approvals

    Pos : 45.12 /D okumentati on allgemei n/Gli ederungsel emente/------Leerz eile------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1 Pos : 45.13 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Zul ass ung en/Sc hiff/Ei nleitungssätzeZ ul ass ungen Bus klemme 750- xxxx Schiff, ohne Vari antenangabe - Einl eitung @ 4\mod_1237190918453_21.doc x @ 28420 @ @ 1 The following ship approvals have been granted to 750-407/040-000 I/O modules: Pos : 45.14 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Schiffsz ulas sungen/GL ( Ger manisc her Ll oyd) C at.
  • Page 24 Device Description WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Federal Maritime and Hydrographic Agency Pos : 45.17.3 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Z ulass ungen/Schiffsz ulass ungen/BV ( Bur eau Veritas) @ 3\mod_1224492116171_0.doc x @ 24220 @ @ 1 BV (Bureau Veritas) Pos : 45.17.4 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Z ulass ungen/Schiffsz ulass ungen/DN V (Det N ors ke Veritas) Clas s B @ 3\mod_1224492540562_0.doc x @ 24224 @ @ 1...

  • Page 25: Standards And Guidelines

    Standards and Guidelines Pos : 47.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/Nor men und Ric htlini en Bus kl emme 750- xxxx, ohne Variantenang abe - Einl eitung @ 7\mod_1274278887584_21.doc x @ 56645 @ @ 1 750-407/040-000 I/O modules meet the following standards and guidelines: Pos : 47.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/Nor men und Ric htlini en XTR - Mechani k und Klima Komponenten-HB @ 18\mod_1394633219581_21.doc x @ 147751 @ @ 1...

  • Page 26: Table 17: Emc - Immunity To Interference

    Pos : 47.4 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/EM V-Nor men Contr oller 750- xxxx/EM V-Nor men Bus klemme 750- xxxx/0040-0000, nur Standar dversi on - Ei nlei tung XTR @ 18\mod_1395909426189_21.doc...

  • Page 27: Table 18: Emc - Emission Of Interference

    10 m or more. Pos : 47.6 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/N ormen und Ric htlini en/Nor men Stör aus sendung XTR @ 18\mod_1394087664442_21.doc x @ 147358 @ @ 1 Table 18: EMC –...
  • Page 28 Device Description WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Table 18: EMC – Emission of Interference Standard Test Value Conducted Emission of Interference – Line Connection AC Voltage • EN 61000-6-3 + A1 Standard not applicable • EN 55022 Class B •...

  • Page 29: Process Image

    Process Image Pos : 50 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte XTR @ 18\mod_1396511070508_21.doc x @ 150676 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variations in the process image depends on the fieldbus coupler/controller used.

  • Page 30: Mounting

    I/O modules with fewer power contacts. Pos : 54.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.

  • Page 31: Inserting And Removing Devices

    Pos : 54.10 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR nic ht unter -20 °C verdr ahten oder umstec ken @ 15\mod_1367559895186_21.doc...

  • Page 32: Removing The I/O Module

    (if any) to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are established. Pos : 54.12 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.

  • Page 33: Connect Devices

    Check if the voltage is positively isolated. Pos : 58 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...

  • Page 34: Connection Examples

    Pos : 60 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Anschl uss beispi ele - Übersc hrift 2 @ 4\mod_1240996036328_21.doc x @ 32010 @ 2 @ 1 Connection Examples Pos : 61 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalei ngangs klemmen/Ansc hlus sbeispi ele 750-040x_2DI_2L_3L_4L @ 14\mod_1358171764964_21.doc x @ 108600 @ 333 @ 1 6.2.1...

  • Page 35: 4-Conductor Connection

    WAGO-I/O-SYSTEM 750 XTR Connect Devices 750-407/040-000 2DI 220V DC 3.0ms /XTR 6.2.3 4-Conductor Connection Figure 13: Connecting Diagram, 4-Conductor Connection Pos : 62 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...

  • Page 36: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 63.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas.

  • Page 37: Marking Configuration Examples

    Marking for Europe According to ATEX and IEC-Ex Pos : 63.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der ATEX- und IEC- Ex-zug elass enen Bus klemmen gemäß C ENELEC und IEC_2013 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 14: Side Marking Example for Approved I/O Modules According to ATEX and IECEx Figure 15: Text Detail –...

  • Page 38: Table 20: Description Of Marking Example For Approved I/O Modules According To Atex And Iecex

    Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Table 20: Description of Marking Example for Approved I/O Modules According to ATEX and IECEx Printing on Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001 X...

  • Page 39: Figure 16: Side Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 63.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 16: Side Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx.
  • Page 40 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Table 21: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Inscription Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001X...

  • Page 41: Table 21: Description Of Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-407/040-000 2DI 220V DC 3.0ms /XTR Table 21: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Gases Equipment group: All except mining 3(1)G Category 3 (Zone 2) equipment containing a safety...

  • Page 42: Marking For America According To Nec 500

    750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 63.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1 7.1.2...

  • Page 43: Installation Regulations

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 63.13 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2Erric htungs bes timmungen - Ü bersc hrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1 Installation Regulations Pos : 63.14 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen Ei nleitung_2013 @ 14\mod_1360582328318_21.doc x @ 111371 @ @ 1...

  • Page 44: Special Conditions For Safe Use (Tüv 14 Atex 148929 X)

    Pos : 63.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 14 ATEX 148929_X @ 21\mod_1416995371807_21.doc...

  • Page 45: Special Conditions For Safe Use (Atex Certificate Tüv 12 Atex 106032 X)

    Pos : 63.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc...

  • Page 46: Special Conditions For Safe Use (Iec-Ex Certificate Tun 14.0035X)

    Pos : 63.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 14.0035 X_2014 @ 21\mod_1416995779884_21.doc...

  • Page 47: Special Conditions For Safe Use (Iec-Ex Certificate Iecex Tun 12.0039 X)

    Pos : 63.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc...

  • Page 48: Special Conditions For Safe Use According To Ansi/Isa 12.12.01

    750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 63.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2_für 750-439, -633, - 663/000-003 @ 21\mod_1417518338537_21.doc x @ 169812 @ 3 @ 1 7.2.5 Special Conditions for Safe Use according to ANSI/ISA 12.12.01...

  • Page 49: List Of Figures

    WAGO-I/O-SYSTEM 750 XTR List of Figures 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 65 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View .......................

  • Page 50: List Of Tables

    List of Tables WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms /XTR Pos : 67 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 51 WAGO-I/O-SYSTEM 750 XTR List of Tables 750-407/040-000 2DI 220V DC 3.0ms /XTR Manual Version 1.2.0...
  • Page 52 Pos : 69 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

750-407/040-000

Table of Contents